How do I connect my s-air speakers?

How do I connect my s-air speakers?

Turn the power off on both the S-AIR main unit and the S-AIR sub unit. Unplug the cards and then firmly plug the cards back in. You should hear a click verifying the cards were properly inserted. The units should now be paired.

How does Sony S-Air work?

The Sony® Audio Interactive Radio Frequency (S-AIR) is a wireless digital audio transmission signal that plays surround sound using a radio frequency that can be placed anywhere that is convenient within the maximum communication distance without the signal breaking up.

Is the Sony AIR SA10 compatible?

The AIR-SA10 S-AIR Speaker System from Sony is perfect for streaming music from your compatible Sony Home Theater system. This wireless speaker can be linked with up to 4 S-AIR Speaker Systems….Sony AIR-SA10 Specs.

Speaker System
Weight 4.88 lbs (2.56kg)

What is S-AIR ID?

The S-AIR ID is an identifier that needs to be programmed to avoid a connection error between the speakers and the connected S-AIR Home Theater (HT) system. In order for two or more units to communicate together, the same ID (A, B, or C) needs to be set on each device.

How do I connect my Sony’s air to my TV?

Follow these steps to complete the one-to-one pairing procedure:

  1. On the main unit, within the SETUP menu, access SYSTEM SETTINGS, then select S-AIR Pairing.
  2. On the back of the surround amplifier, press the black PAIRING button using a sharp-pointed instrument, such as a paper clip or pen tip.

What is Ezw RT10?

EZW-RT10 Transceiver. WAHT-SA10 Wireless Surround Amplifier Kit. Main unit has a built-in transmitter.

How many Sony speakers can you connect?

The Bluetooth® speaker can be paired with up to 4 devices. If a new device is paired after 4 devices have been paired, the device with the oldest connection time among the 4 paired devices is replaced by the new one.

How do I get my TV to play sound through my receiver?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

How do I pair my Sony speakers to each other?

Press and hold the (power) PAIRING button of the speaker where the (BLUETOOTH) indicator flashes in white. Beeps are heard when the speaker enters pairing mode and the (BLUETOOTH) indicator begins to flash quickly. While the speaker is in pairing mode, make the BLUETOOTH connection from the BLUETOOTH device.

Can you plug any speakers into a receiver?

Your receiver will need to include pre-outs or Zone 2 lines in order to connect powered or active speakers to it. Simply connect your speakers to the pre-outs or zone 2 outputs. You cannot connect powered or active speakers to a receiver’s normal speaker terminals because it WILL damage the speakers.

  • October 15, 2022