How do I export from Altium?
Table of Contents
How do I export from Altium?
Use “File > Export > Altium…”, clicking “Download” will create a . schdoc file.
How do I cut a track in Altium?
In the PCB Editor, use the Edit » Slice Tracks command, from the main menus. You will enter track slicing mode. Click to define the desired starting location for the slice, then press Tab to access the Slicer Properties dialog.
How do I print a PCB in Altium design?
Go to the PCB Editor window and enter 3D mode (shortcut: 3). Use the 3D view controls to achieve the desired perspective. Return to the job output file and double-click anywhere on the PCB 3D Print row (or right-click on it and select Configure from the shortcut menu) to open the PCB 3D Print Settings dialog.
How do I export from Altium to STL?
To convert a STEP file to an STL using the GUI, you can follow this process:
- Open the file (file, open). This can take up to 10 minutes.
- Run the volumetric meshing. (Modules, Mesh, 3D)
- Save to STL (File, Export)
How do I select an entire track in Altium?
To select a track on one layer in Altium Designer, press TAB. To select the whole track, use 2x TAB.
How do I export Schematic from PCB to Altium?
The process for how to convert a schematic to a PCB layout in Altium Designer follows three simple steps:
- Step 1: Preparing to Synchronize the Design.
- Step 2: Use the Schematic Capture Tool to Import Design Data to a PCB.
- Step 3: Define Your Layer Stack.
How do I open CAM files in Altium?
To do so, select File » New » CAM Document from the main menu. Next, select File » Import » Quick Load to open the File Import – Quick Load dialog. Once the files have been imported, the Steps Table dialog will open.
How do I open CAMtastic in Altium?
Panel Access
- Click the CAMtastic tab on the lower right of the design space.
- Click View » Panels » CAMtastic.
How do I download Altium 3D models?
Download the 3D model file stored in a revision of a 3D model, by right-clicking on that revision (in the Explorer panel) and choosing the Operations » Download command from the context menu. The file will be downloaded into a sub-folder under the chosen directory, named using the Item Revision ID.
How do I edit a step file in Altium?
In Altium you can import enclosure step files and just design the board inside the enclosure. But with Altium I can’t do any cut outs for connectors etc. so then I export the PCB with connectors and enclosure to step file. Then I just import the step file to FreeCad, select enclosure face and draw sketch to the face.
How do I export a PCB PDF from Altium?
To export a PDF 3D file, open the desired PCB design document in the workspace and choose the File » Export » PDF3D command from the main menus.
How do I create an output job in outjob?
Select File > New > Output Job File from the main menus to create a new OutJob file related to the project. A new OutJob editor will open in the design space with the settings of output files. In this editor, you can specify all the necessary documents for export and upload them at the same time.
How to create an outjob in Kame_FMU?
Make sure that project Kame_FMU. PrjPCB is active. Select File > New > Output Job File from the main menus to create a new OutJob file related to the project. A new OutJob editor will open in the design space with the settings of output files. In this editor, you can specify all the necessary documents for export and upload them at the same time.
How do I edit an output job configuration?
An Output Job Configuration can be edited and saved into the initial revision of a newly-created Outputjob Item, courtesy of the Workspace’s support for direct editing. Direct editing frees you from the shackles of separate version-controlled source data.
What is the output editor in the project tree?
Simultaneously, the new.OutJob document will appear in the project tree. The main section of this editor is Outputs and it is divided into groups depending on the type of documentation: Assembly, Fabrication, Report, etc.