What does F9 mean on Maytag stove?
Table of Contents
What does F9 mean on Maytag stove?
Door Latch
F9. Door Latch. This oven error code means the door latch is not work. It could be caused by a blockage in the latch or issues with the wiring or switches on the upper latch, lower latch, or both. If the latch needs to be replaced, do not turn on or use your oven until the latch is replaced.
What does F5 mean on a Maytag oven?
If wiring is ok, replace oven temperature sensor (RTD). F5 – Watchdog and Hardware Conflict – Replace control board (clock). F7 – Function Key Stuck or Shorted – Replace touch pad, or touch pad and control board (clock) if one assembly.
How do you clear an F9 code?
How to Remove the F9 Code From Maytag
- Hold on the “Start/Stop” button for 10 seconds. This will end the beeping.
- Open the oven door and check the door latch.
- Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
- Press the oven door shut gently.
- Test the oven.
How do you fix f9 error on LG electric oven?
Try to reset the unit by either unplugging the range or switching circuit breaker to “off” position. 5. Advise customer to leave it “as is” for 3 to 5 minutes then re-plug or switch breaker back “on”.
Why is my Maytag oven beeping?
When the oven beeps, it is to alert the user that the food is complete. Some models will continue to beep as a reminder to take the food out of the oven. Convection ovens also sometimes include a temperature gauge that will cause the oven to beep when it’s at 75% of the original cooking time.
What does f3e2 mean on a Maytag oven?
There may be a problem with the Oven Temperature Sensor, the Warming Drawer Sensor (if so equipped), or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s).
What does F9 mean on my washing machine?
A Whirlpool washer error code E1/F9 occurs when the washer’s control board detects that the washer cannot drain. Therefore, to resolve the E1/F9 error code, the washer components responsible for draining will need to be checked and possibly replaced.
What does F9 mean on my washer?
November 1, 2021. Washer Repair. A Whirlpool washer E1 or F9 error code (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes).
How do I unlock my Maytag oven door?
Door is locked when starting or using the oven Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
What does f2e0 mean on a Maytag stove?
This error code means that some key is stuck on the oven user interface. If this error occurs, you need to replace the oven electronic control board. Our technician replaced this board, tested it and the oven worked again.
How do you clear the code on a Whirlpool F9?
Reset the appliance
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Monitor the range or oven for one (1) minute to ensure the error code does not display again.
- Verify the range or oven operation.
