How do I fix the ink cartridge on my Lexmark printer?
Table of Contents
How do I fix the ink cartridge on my Lexmark printer?
Step 1: Turn your Lexmark printer device ON, and access the printer cartridges inside your device. Step2: Pull the cartridges firmly and remove them from the printer. Step 3: Now close the area from where you have removed the cartridges in the sane reversible manner as how you opened it previously.
How do I clear error messages on my Lexmark printer?
To get rid of the 920 error message, power off the printer and wait for about a minute. Then power it back on and wait to see if the error persists. If it does, your Lexmark printer’s fuser unit needs to be reinstalled.
How do I get my Lexmark printer to recognize my refilled toner cartridge?
How to Reset Lexmark Ink Cartridge Memory
- Turn off the printer and unplug the power cord.
- Wait approximately one minute to allow the ink cartridge memory to reset.
- Plug the power cord back in and turn the printer on.
- Check the ink levels to verify that they are correct.
How do you fix an unsupported ink cartridge?
One side of the cartridge may not be seated fully in the cartridge’s holder or the cartridge may not be all the way in the holder. To resolve the error, turn off your printer and remove the cartridge. Reinstall the cartridge until you hear the cartridge click in place or it’s fully seated in its holder.
How do you fix a printhead error on a Lexmark printer?
Solution
- Open the printer’s top cover.
- Remove the toner cartridge and then the imaging unit.
- Reinsert the toner cartridge and the imaging unit. Make sure that everything is seated properly.
- Restart the printer.
How do I clear the memory on my Lexmark printer?
From the home screen, touch Settings > Device > Maintenance > Out of Service Erase. Select the Sanitize all information on nonvolatile memory check box, and then touch ERASE. Follow the instructions on the display.
