Where is the engine number on a 253?
Table of Contents
Where is the engine number on a 253?
On 253, 308, 4.2 litre and 5.0 litre V8 engines it is located on the left (viewed from the rear) side of the block slightly above and forward of the starter motor mounting pad.
How much HP does a 253 have?
| Engine manufacturer: | GMH-253 |
|---|---|
| Horsepower gross: | 138 kW / 188 PS / 185 hp (SAE gross) |
| / 4400 | |
| Torque gross: | 355 Nm / 262 ft-lb |
| / 2400 |
Where is the engine number on a Holden 202?
It is on the right hand side/ driver side close to engine bracket.
How do I know if I have a 308 or 253?
Look at the passenger’s side of the engine towards the front, just above the front exhaust port. An original 1979 253 number will start with ZR, 308 with ZT.
How much power does a Holden 253 make?
The 253 made its public debut in the Holden Hurricane concept car at the 1969 Melbourne International Motor Show, albeit it in a highly modified form featuring increased 10.1:1 compression, big cam and solid lifters, and producing over 250 hp (190 kW).
Do 308 heads fit a 253?
The 253 heads are the same casting as the 308; therefore, they have the same original chamber volume. With the block bored and honed to size, the ACL Duralites were fitted to the original rods and a trial assembly performed. It’s now that you find out if everything fits!
How do I read Holden ID tags?
- There are 5 sections that make up the VIN number; Section 1 First digit Vehicle Manufacturer.
- Section #1 Vehicle Manufacturer. 8 = Holden.
- Section #2 Series Designation. 0269 = Belmont Sedan V* (HQ SS)
- Section #3 Model Series. K = HK.
- Section #4 Assembly Plant.
- Section #5 Vehicle Sequence Number.
How much does a Holden 253 weigh?
The engine had a displacement of 253 cu. in., 4.146 litres, a compression ratio of 9:1, a maximum horsepower 185, and a maximum torque of 262 lb. ft. Dry weight of the complete engine assembly from fan to flywheel and with all accessories including the alternator and starter was 460 lb., only 80 lb.
How much HP does a 308 have?
The Holden 308 Later a ‘308’ version was announced. This was essentially an increased version of the 253 and gave 240 bhp (180 kW) at 4000 rpm and maximum torque of 315 ft/ lb (420 Nm) at 3000 rpm. It had a 9:1 compression ratio and a 4-barrel quadrajet carbie.
How many Litres is a 253 v8?
The engine had a displacement of 253 cu. in., 4.146 litres, a compression ratio of 9:1, a maximum horsepower 185, and a maximum torque of 262 lb. ft.
What year was the EJ Holden made?
1962
The Holden EJ is a motor vehicle produced by General Motors-Holden’s in Australia from 1962 to 1963. Introduced in July 1962, the EJ replaced the Holden EK series.
