What is a remote socket?
Table of Contents
What is a remote socket?
This Status remote control socket is a handy way to turn power sockets on and off. A clever way to control your power sockets in hard to reach areas, where access to a power plug is limited. With a 20 metre range, your item can be switched on and off from the comfort of your sofa.
How do remote control sockets work?
How do they work? You simply plug the receiver socket into the wall and plug whatever you want to control in to the socket. Do double check the current rating of the device you want to use so you. They’re VERY simple to operate.
What is 433mhz RF remote?
This product is a 4-button RF remote control, the frequency is 433.92MHz. RF remote control is widely used, such as garage door remote control, electric curtain remote control. There are four buttons and a red LED on the front of the product.
How do you use Energenie?
Via a Browser: Hold down the button on the front of the housing of the adapter for 5 seconds or more. You should see the red light on the adapter housing start flashing at 1 second intervals. Select the option to pair a new socket and choose the Control Socket to be paired.
What is WIFI socket?
Wifi electrical sockets are a simple and convenient way to boost your wifi throughout the home. A wifi plug socket can be easily swapped with existing sockets to boost wifi in any weak areas of a home or building without the need for additional wiring or adapters.
How do you reset Uni com plugs?
To clear the channels and reset a socket turn the power off and on at the mains, then press and hold the ALL OFF button on the remote control until the red LED flashes quicker, upon releasing the button the socket will be reset and ready to set up on a new channel.
How do I pair my Etekcity remote with outlet?
Plug an appliance into each outlet. Keep the appliance switch to ‘ON’ in order to allow the outlet to control the device. Press the ‘ON’ or ‘OFF’ button for the corresponding number on the remote. The indicator light on the corresponding outlet will turn on, confirming that the outlet is now in use.
What devices use 433MHz?
433MHz is a commonly used frequency band for all types of equipment that require little power, such as garage door openers, headphones, baby phones and remote controls. Also many inexpensive transmitters and receivers for switching devices and light dimmers operate on the 433MHz band.
How do you test a remote control?
Press and hold one of the buttons on the remote control. Look at the viewfinder or LCD screen….If this is the case:
- Remove the batteries.
- Press and release each button a couple of times to see if you can free the stuck button.
- Reinsert the batteries and test the remote again.
How do I set up my Energenie plug?
Hold down the button on the front of the housing of the adapter for 5 seconds or more. You should see the red light on the adapter housing start flashing at 1 second intervals. Select the option to pair a new socket and choose the Control Socket to be paired.
How do I program my Energenie socket?
Point the hand controller at the socket and press and hold briefly one of the pairs of numbered buttons you wish to use to control the socket. The red indicator light on the exten- sion lead will flash quickly and then turn off to indicate the socket was successfully programmed.
Are WiFi sockets any good?
In conclusion, if you or your customers have a room or space that suffers from poor Wi-Fi I’d definitely recommend getting a couple of these sockets fitted. They’re also a great ‘up-seller’ for those occasions where you’re doing domestic work and spot the need for a customer.
What is a uni com switch for?
Effortlessly turn on and off household appliances at the click of a button. Use to switch off appliances on standby. Each socket can be operated separately or together using the remote control.
How do I pair my Dewenwils remote?
Press the program button on the receiver for 6 seconds until the indicator light starts to flash slowly. Release the program button and then press the “on” or “off “button on the remote control. Programming/paring is successful when the indicator light stops blinking.
