What is a 1956 Mercury Montclair worth?

What is a 1956 Mercury Montclair worth?

Current pricing for a 1955 Mercury Montclair hardtop goes from a low retail of $8,600 with the Merc-O-Matic automatic to a high of $42,000 for a pristine restoration. The 1956 Montclair hardtop is similar in price, with a $9,500 low retail to a high of $46,900.

How much is a 1956 Mercury worth?

Vehicle Valuation Analysis

Bodystyles Median Sale
Convertible $50,600
Hardtop Coupe $24,750
Hardtop Sedan $33,300

How long is a 1956 Mercury Montclair?

The 1956 Mercury Montclair measures 76.40 inches in width, The 1956 Mercury Montclair measures 206.40 inches in length, and has a wheelbase of 118.00 inches.

How long is a 1955 Mercury Montclair?

The 1955 Mercury Montclair measures 206.30 inches in length, and has a wheelbase of 119.00 inches.

What was the top of the line Mercury in 1956?

The top-of-the-line wagon for 1956 was the Monterey version. It was the most expensive Mercury, and 13,280 were produced. The 1956 Mercury Custom 2-doorhardtop was another popular car with 20,857 were sold. The 1956 Mercury Custom 4-door hardtop sold well with 12,187 delivered.

What kind of car is a Montclair?

The Mercury Montclair is a series of full-size sedans that were manufactured and marketed by the Mercury division of Ford. The nameplate was used by the division twice, from the 1955 to the 1960 model years and from the 1964 to the 1968 model years.

How much horsepower does a 1953 Mercury have?

Power

V 8
Power : 162 HP (119.232 KW) @ 4400 RPM
Bore : 3.6 in | 92 mm.
Stroke : 3.1 in | 79 mm.
Compression : 7.5:1

What engine was in the 1956 Mercury?

312-cubic-inch V-8
1956 Mercury Montclair – Big and Powerful The standard engine in the 1956 Montclair was a 225-horsepower, 312-cubic-inch V-8. However, the performance-minded buyer could also opt for a more powerful 312-cubic-inch engine, a 335-horsepower power plant with a four-barrel carburetor.

Who made the Montclair automobile?

Mercury (Ford)

Mercury Montclair
Manufacturer Mercury (Ford)
Production 1955–1960 1964–1968
Assembly Main plant Wayne, Michigan (Branch assembly) St. Louis, Missouri Maywood, California Pico Rivera, California Metuchen, New Jersey
Body and chassis

Who made the Monterey?

Deriving its name from Monterey Bay, the Mercury Monterey served as the upscale version of the Mercury Custom which replaced the Mercury Eight, the debut model line of the Mercury division….1965–1968.

Sixth generation
1967 Mercury Monterey convertible
Overview
Model years 1965–1968
Body and chassis

What is a Mercury Montclair?

What engine did the 1956 Mercury have?

What is an 8BA engine?

In general, the latter year flatheads were commonly referred to as the “8BA” type for Ford and “8CM” for Mercury. The truck version was identified as an “8RT”. Later 1952 and ’53 Fords and Mercurys were known as “EAB” and “EAC” respectively. These markings are generally cast into the cylinder heads.

What engine was in a 1954 Mercury?

4195 cc | 256.0 cu in. | 4.2 L. Bore : 3.6 in | 92 mm.

Who made Mercury Monterey?

the Ford Motor Company
The Mercury Monterey is a full-size car model introduced by the Mercury division of the Ford Motor Company in 1952. It would later share the same body style with the slightly more upscale Marquis, and the Park Lane and Montclair until the latter two were extinguished after the 1968 model year.

What year is an 8BA engine?

The latest iteration of this engine was used from 1948 to 1953 in the U.S and till 1954 in Canada. It was initially designated the 8BA (see above) in automobiles and the 8RT in trucks. 8RT remained the truck engine designation throughout the entire run from 1948 through 1953 in the U.S (1954 in Canada).

What is the horsepower of a 1954 Mercury?

Engine manufacturer: Mercury V-8 256
Torque net:
Horsepower gross: 120 kW / 163 PS / 161 hp (SAE gross)
/ 4400
Torque gross: 323 Nm / 238 ft-lb

How long is a 1954 Mercury?

The 1954 Mercury Monterey measures 206.20 inches in length, and has a wheelbase of 118.00 inches.

  • October 3, 2022