What is a reinforcement bar schedule?

What is a reinforcement bar schedule?

Reinforcement Bar Schedule It contains all the details needed for fabrication of steel. Those details are bar mark, bar type and size, number of units, length of a bar, shape code, distance between stirrups (column, plinth, beam) etc.

What headed bars?

A headed bar is a deformed steel bar with a head attached to one, or both ends of the bar. Headed bars can be used as a replacement for straight or hooked bars in concrete members and connections.

How do you do a bar bending schedule?

Step by Step Preparation of Bar Bending Schedule.

1. Identification of Members (Steel Bars)
2. Step 2 Count the Number of bars.
3. Step 3: Calculate the length of Reinforcement bars.
4. Step 4: Calculate the unit weight of Reinforcement Bar.
5. Step 5: Calculate the Weight of particular Shape of Bar.

What is bar mark in reinforcement?

The bar mark (e.g. “ T2 ”) represents the type of reinforcement present in the column. Each bar mark in the schedule is also shown in the Section Legend with a graphical representation of the column section and the reinforcement.

Why is bar bending schedule prepared?

Important Usage of Bar Bending Schedule It increases the speed of construction and the transportation cost also reduces. Before placing the concrete if the bending and cutting length of TMT Steel bars are measured it becomes easier for site engineers.

What is HRC and rebar?

HRC (Headed Reinforcement Corporation) Europe was a pioneer in the newer development of headed reinforcing bars and has produced headed rebar since 1985. HRC headed bars are characterized by their high performance and consistent high quality.

What is a rebar Terminator?

The Terminator is an oversized coupling secured to the end of a length of reinforcing steel, creating anchorage within the concrete. This approach greatly simplifies rebar placement and reduces congestion. The Terminator incorporates the time-tested and field-proven LENTON tapered thread (See below).

Is standard for bar bending schedule?

Bar Bending Schedule Formulas As Per IS:2502-1963 | Unit Weight of Steel Bars

• What Is Bar Bending Schedule? Format of Bar Bending Schedule as per Code IS:2502-196.
• Bar Bending Schedule Use Formulas. Op-1. Op-2. Plan Bar Length. Bends and Hooks Forming End Anchorages ( As per IS 2502:1963 )

Is code of Bar bending schedule?

Bar Bending Schedule Formulas As Per IS:2502-1963 | Unit Weight of Steel Bars.

What is N12 reinforcement bar?

N12 Steel Reinforcement Bar is a 12mm diameter deformed steel rod used for vertical and horizontal reinforcement of masonry walls. Formerly known as Y12 (and still commonly called Y12 by many), improvements in processing technology have allowed the stronger N12 product to replace Y12.

What is HRC list price?

While hot-rolled coil (HRC) is quoting in the range of Rs 76,000-77,000 per tonne, cold-rolled coil (CRC) is costing between Rs 85,000-86,000 per tonne.

How is HRC produced?

Hot rolled steel products are divided into two groups: hot rolled coils produced through hot rolling and hot rolled steel plates, which are made by cutting material from hot rolled coils. Slabs produced from a continuous casting system are rolled, cooled and coiled into the sizes required by the customers.

What is rebar coupler?

Rebar couplers are components which connect two reinforcing bars in longitudinal direction, forming a mechanical splice. This is an alternative to lap splices or welded connections. Mechanical splices are used to avoid protruding bars in casting joints, reduce congestion in confined spaces and to save rebar length.

Is 456 latest revision PDF?

It is written for use in India. It gives extensive information on the various aspects of concrete. Download the IS 456 Code 2000 in PDF format using the link given below….