What do Molex connectors look like?

What do Molex connectors look like?

In such a connector, cylindrical spring-metal pins fit into cylindrical spring-metal sockets. The pins and sockets are held in a rectangular matrix in a nylon shell. The connector typically has 2 to 24 contacts and is polarized or keyed to ensure correct orientation.

What does a Berg connector connect?

Sometimes labeled on the cable as P7, the Berg connector is a power connection developed by Berg Electronics. It is used with computer power supplies that connect to floppy disk drives, front panel lights, and reset or turbo buttons.

Is Molex and SATA the same?

Molex connections have four large pins, which are shaped similar to the ground prong on an AC cord. SATA connections, on the other hand, have a flat, 15-pin design that looks much more advanced. Typically, molex connections are found on older drives, or on larger 3.5 or 5.5-inch drives.

What replaced the Molex connector?

During the 90s, the Molex compound was phased out in connector housings, replaced by other thermoset plastic material, and eventually more environmentally friendly, recyclable thermoplastic materials.

Is a Molex 4-pin?

The Molex 4-pin power supply connector is one of the standard peripheral power connectors in computers today. The power connector itself is a Molex 8981 connector called the AMP MATE-N-LOK.

How many pins are in a Molex connector?

Four-Pin
Four-Pin Molex Connector The most famous of all ‘Molex’ connector configurations may be the four-pin connector, a versatile component that suits many power and IO connector applications.

Where do I connect Berg connector?

Plug the four-pin Berg power connector into the FDD. Connect the three-pin fan power connector into the appropriate fan header on the motherboard according to the motherboard manual. Plug the additional cables from the case into the appropriate connectors according to the motherboard manual.

Where is the Berg connector located?

Berg connectors are manufactured by Berg Electronics Corporation of St. Louis, Missouri, now part of Amphenol.

Can you connect SATA to Molex?

The Cable Matters 4-Pin Molex to SATA Power Cable Adapter is a handy addition to your toolbox when building, upgrading or repairing computers. It connects newer SATA internal hard drives, optical drives, and motherboards to a power supply with legacy LP4, 4-pin Molex connectors.

Which is better Molex or SATA?

Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps. The other 2 pins are ground wires… SATA power connectors has a total of 15 pins of which 9 are power pins (3 x 3.3V, 3 x 5V, 3 x 12V).

What is a 4 pin Molex connector?

Often refers to the 4-pin connectors used to attach DC power to the drives inside a PC cabinet. Molex is a large manufacturer of electronics plugs and sockets that dates back to the 1940s.

How many pins does Berg connector have?

4-pin
There are different types of Berg connectors, with the 4-pin and 2-pin being the most familiar. The 4-pin Berg connector is commonly known as the floppy power connector, as it was used for connecting the 3.5-inch floppy disk drive to the power supply unit. It is the most popular Berg connector.

What is a Molex used for?

Molex is the name of the company who develops computer and other related connectors and products. Also known as a Molex power connector (pictured), it connects your computer power supply to drives and devices inside the computer.

What is a Molex power connector?

A Molex connector is a common type of connector used to power internal computer components. The name comes from the Molex Connector Company, which pioneered the two-piece electrical connectors that became standard in computers and other electronics.

What is a berg strip?

Berg Strip is a commonly found connector in all kind of circuit boards. It is also called as Berg Stick because of its stick like structure. Berg Strip is designed by the Berg Electronics Corporation at Missouri. The Berg Strip is very light and compact and it can be easily assembled to a circuit board.

How many pins does Berg have?

4
Floppy drive power connector

Type	Electrical
Production history
Designer	Berg Electronics Corporation
General specifications
Pins	4

What does a SATA power cable look like?

So what does SATA cable look like? As far as the data cable goes, this is a very thin ribbon like cable with identical 7 pin connectors on either end and a distinct L-shaped key in the middle. The SATA power cable, on the other hand, has a larger 15 pin connector and originated from the Power Supply Unit.