What do I do if my Master Lock is jammed?
Table of Contents
What do I do if my Master Lock is jammed?
Please try resetting the lock again by following the instructions below:
- Place lock in the open position.
- On the back of the lock, slide the reset lever into the “up” position.
- Insert the shackle into the lock and squeeze firmly twice to “clear” it.
- Pull up on the shackle to open the lock.
- Enter your new combination.
Why is my padlock not closing?
The most common is that the lock cylinder won’t properly turn with the key inserted. Before attempting to fix this problem, however, always double-check that you are using the correct key for that lock. If you are, then the lock’s internal parts may be frozen from cold or stuck because of rust or grime.
Can you reset a Master Lock?
Therefore, Master Lock does not have record of the combination that the owner set. The lock cannot be reset unless it is in the open position. If your lock is attached to something, you will need to call a locksmith for removal.
Is there a way to break a Master Lock?
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
Can you force open a lock?
One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock’s shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.
How do I recover my combination for my Master Lock?
If your lock has a serial number, you can recover your combination in one of three ways. You can visit a Master Lock Distributor / Retailer or submit a Lost Combination form.
Can I get the combination for a master lock padlock?
For security and liability reasons, Master Lock will not provide lock combinations in response to phone, fax, or email requests. However, if the padlock is not secured to anything and it has a serial number, you may send it to: With a check for $12.00 each padlock.
How do I prove I am the owner of a Master Lock?
Canadian distributors can call 1-800-227-9599. Please note that although Master Lock does not charge for this service, the retailer may charge a fee. Find your lock’s serial number. Print out the Lost Combination Form (PDF). Have the form notarized by a Notary Public to prove you are the owner of the lock.
How do I clean the moisture out of a padlock?
For wheels that are hard to turn, we recommend using a WD40 solution for cleaning or washing the moisture out of a padlock but a good lubricant needs to be applied afterwards. Q: Will Master Lock reimburse me for locksmith charges?
