What is Reagentc?
Table of Contents
What is Reagentc?
You can use the REAgentC.exe tool to configure a Windows Recovery Environment (Windows RE) boot image and a push-button reset recovery image, and to administer recovery options and customizations. You can run the REAgentC command on an offline Windows image or on a running Windows operating system.
How do I fix WinRE?
Entry points into WinRE
- From the login screen, click Shutdown, then hold down the Shift key while selecting Restart.
- Click Start > Settings > Update & security > Recovery > under Advanced Startup, click Restart now.
- Boot to recovery media.
- Use a hardware recovery button (or button combination) configured by the OEM.
How do you use Reagentc?
Way 1. Enable Windows recovery environment
- Type “CMD” in the Windows search box and press Enter. Locate the result Command Prompt, right click on it and select Run as administrator.
- Type “reagentc /info” (without quotes) and press Enter.
- If it is disabled, just type “reagentc /enable” to re-enable it.
How do I open a WinRE wim file?
Find and Copy the Winre. To do it, open the \sources\install. wim (or install. esd) on the DVD/ ISO image using 7-Zip and extract the \Windows\System32\Recovery\Winre. wim and ReAgent.
How do I fix Windows could not update the boot configuration?
How to FIX: Windows could not update Boot configuration in Windows 10 Setup.
- Enter BIOS (CMOS) Setup settings.
- Enable the Legacy support.
- Change the Boot Mode from UEFI to Legacy (CSM).
- Then Disable the Secure Boot in Security options.
- Set as First boot device the Legacy Windows USB drive.
- Save and exit from BIOS Setup.
How do I fix my laptop in recovery mode?
You can fix Windows Error Recovery errors using these methods:
- Remove recently added hardware.
- Run Windows Start Repair.
- Boot into LKGC (Last Known Good Configuration)
- Restore Your HP Laptop with System Restore.
- Recover the Laptop.
- Perform Startup Repair with a Windows installation disc.
- Reinstall Windows.
How do I turn off recovery mode?
To get out of Safe Mode:
- 1 Press the Power button and select Restart.
- 2 Alternatively, press and hold the Volume Down and Side key at the same time for 7 seconds.
- 1 Use the Volume Up or Volume Down button to highlight the option Reboot system now.
- 2 Press the Power button to confirm the selection.
What app opens a wim file?
With PowerISO, you can open an WIM file, and extract files from the WIM file. Run PowerISO. Click the “Open” button on toolbar or choose “File > Open” menu to Open WIM file. If there are more than one image in the WIM file, PowerISO will show a dialog prompt you to select an image to open.
What is a WinRE wim file?
Winre. wim is the image file containing the bootable repair tools for Windows kept in the Recovery folder in the Recovery partition WIndows installs, which in previous editions was on C.
How do I disable secure boot in BIOS?
How to disable Secure Boot in BIOS?
- Boot and press [F2] to enter BIOS.
- Go to [Security] tab > [Default Secure boot on] and set as [Disabled].
- Go to [Save & Exit] tab > [Save Changes] and select [Yes].
- Go to [Security] tab and enter [Delete All Secure Boot Variables] and select [Yes] to proceed.
How do you get into the BIOS in Windows 10?
To enter BIOS from Windows 10
- Click Update & security.
- Click Recovery, then Restart now.
- The Options menu will be seen after executing the above procedures. Click Troubleshoot.
- Select Advanced options.
- Click UEFI Firmware Settings.
- Choose Restart. This displays the BIOS setup utility interface.
How do I enable Windows RE?
Enable WinRE via Command Prompt
- Press Windows key + R to open up a Run dialog box.
- Once you’re inside the elevated Command Prompt, type the following command and press Enter to enable the recovery environment: reagentc.exe /enable.
- You might be prompted to confirm the modification.