What size board will a 12-inch sliding miter saw cut?
Table of Contents
What size board will a 12-inch sliding miter saw cut?
2 x 8
Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).
How much does a sliding compound miter saw cost?
What Do Professional-Level Miter Saws Cost?
| Professional Miter Saw | Cost |
|---|---|
| Makita 8-1/2 in. Corded Single Bevel Sliding Compound Miter Saw (Home Depot) | $385 |
| Makita 15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser (Home Depot) | $599 |
| Bosch 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw (Home Depot) | $599 |
Can a 12-inch miter saw cut a 4×4?
The size of the 12” miter saw blade is such that it can easily cut through a 4×4. So, if you want to avoid the extra work, then a 12” saw is recommended.
How thick of wood can a 12 miter saw cut?
Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
Can I use a 10 inch blade on a 12 inch miter saw?
Can I Put a 10 Inch Saw Blade on a 12 Inch Miter Saw? Many of us in the world of woodworking are familiar with a misconception, “we can’t replace the blade of the 12-inch miter saw with a 10 inch saw blade!” But the truth is that it’s 100% possible if you want to go for a better replacement.
Do I need a single or double bevel miter saw?
Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece. It also makes the job easier and quicker, as you can make faster repetitive cuts even on longer workpieces. For contractors or highly committed hobbyists, a dual bevel miter saw will improve your workflow and efficiency.
Do you push or pull a sliding miter saw?
Sliding miter saws are designed to cut on the push stroke. Pulling a miter saw through the cut results in a climb cut that could cause the blade to rise up out of the wood and chase after you.
What is the difference between a compound miter saw and a miter saw?
Compound cuts include both a bevel and miter. A compound miter saw adds the ability to make bevel cuts in addition to its mitering ability. You’ll want to make sure you have this feature anytime you work with crown molding or other trim that gets installed on a wall.
Will a 12 inch sliding miter saw cut a 6×6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6. The capacities in the specs (page 36) are based on the widest and thickest pieces that could be cut laying flat.
What is the advantage of having a sliding miter saw?
Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.
What makes a sliding compound miter saw better than a miter saw?
A sliding miter saw is a type of miter saw that adds rails to let the saw blade slide front to back across the wood. It gives you a much greater depth of cut than the same size miter saw without rails. Most sliding miter saws also include the ability to make a compound cut.
How thick can a 12 miter saw cut?
Can a 10 Mitre saw cut a 4×4?
If you really want to cut 4x4s reliably, and if you foresee many future projects involving 4x4s, then you’re asking the wrong question. It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
