What is a Sillcock valve?
Table of Contents
What is a Sillcock valve?
A sillcock (or hose bib) is an outdoor water faucet that is located and attached to the exterior of a house. Sillcocks are nothing more than spigots that you’ll find coming out of your house. They essentially have a spout in which to connect hoses to or just access tap water while outside.
What is the cap on the Sillcock for?
This feature prevents the formation of a vacuum that could pull water from the outside into the clean water supply. While you can retrofit backflow preventers to standard spigots, frost-proof hose bibs have one built in, and that’s what you’ll find beneath that plastic cap.
Why does my Sillcock leak?
One of the most common reasons why your sillcock could be leaking is due to a work-out cartridge or stem washer. To identify if this is the problem with your water hydrant, notice if when you try closing the handle, water refuses to stop flowing completely.
What is the difference between a faucet and a spigot?
Faucet is the most common term in the US, similar in use to “tap” in British English, e.g. “water faucet” (although the term “tap” is also used in the US). Spigot is used by professionals in the trade (such as plumbers), and typically refers to an outdoor fixture.
How do you change the stem on a silcock?
Sillcock Repair Tip:
- Remove sillcock handle, and loosen retaining nut with channel-type pliers. Remove stem. Replace O-ring found on retaining nut or stem.
- Remove the brass stem screw at the end of the stem, and replace the washer. Reassemble the sillcock.
What is the cap on top of my outdoor faucet?
The vacuum cap is circular and about an inch in diameter, and it either slips or screws onto the top of the faucet. The device underneath it is known as a vacuum breaker or an anti-siphon valve.
How much does it cost to replace a Sillcock?
Replacing a hose bib, also called a spigot or sillcock, averages $175, or between $100 and $300. New installation raises the price to $200 to $500 depending on the spigot’s proximity to existing plumbing.
How does a Sillcock work?
AKA “Sillcock”. It works by shutting off the water inside your home and allowing the water to run out of the actual faucet so that there is nothing to freeze. Years ago before these things were invented, we would just shut the water off inside the home which supplied that faucet under the house, and drain the line.
What do you call the water faucet outside?
A spigot is a faucet, a device to turn water on and off. If you leave a spigot open, the water will keep flowing. In the U.S., most of us call an indoor valve (in the kitchen or bathroom) a faucet, and the outdoor one a spigot.
What are the different parts of an outdoor faucet?
The 9 Parts of an Outdoor Faucet
- Supply Pipe. Although the supply pipe isn’t a direct component of the outdoor faucet itself, you can’t get water without it.
- Wall Mount.
- Faucet Housing and Spigot.
- Valve Seat.
- Stem Washer.
- Spindle (Stem)
- Packing Washer.
- Packing (Bonnet) Nut.
How much does a plumber charge to change a spigot?
Plumber Cost to Install a New Outdoor Water Spigot For most small jobs, plumbers charge a flat rate of $100 to $300 which includes both materials and labor. For larger projects that require new pipes, demolition or that might exceed an hour and a half, expect to pay $45 to $65 per hour.
Why is water not coming out of my outside faucet?
If you are still having issues with your outdoor faucet, you may need to call a plumber to investigate the issue further. If the faucet has no water, the issue could be the aerator or the spout inside the faucet. At the bottom of the faucet spout, rubble may get into the filter.