What type of a connector is used with MC cable?
Table of Contents
What type of a connector is used with MC cable?
AC/MC Cable Connectors (5-Pack) are compatible with several sizes of AC and MC cables. They are constructed of galvanized steel and are intended for indoor installation. AFC Cable Systems connectors ensure a secure fit for installation integrity.
What is an MC connector?
MC connectors are specially designed for low contact resistance and good stable connections under a wide range of conditions. MC means “multi-contact.” The term “multi-contact” comes from the fact that the connectors have a bunch of little spring loaded gold plated fingers that ensure good contact.
What size is an MC connector?
3/8 inch, MC Connector – 1/2 inch, K.O. Size, Material: Die Cast.
Can I use MC cable in residential?
MC Cable Permitted Uses MC Cable, when listed and labeled for use, can be a wiring method in locations such as: Commercial, industrial, and residential/commercial buildings.
What size connector is 6’3 MC?
Snap-In MC Connector for Aluminum and Steel MC, Material: Die-Cast Zinc, Cable Diameter 0.590″ to 0.920″, For the Following MC Sizes: 10/3, 10/4, 8/2, 8/3, 8/4, 6/2, 6/3.
What size Flex do I need?
Choosing the correct size flex
| Conductor Size | Current | Maximum power (Watts) |
|---|---|---|
| 0.75 mm2 | 6 amps | Up to 1440 Watts |
| 1.0 mm2 | 10 amps | Up to 2400 Watts |
| 1.25 mm2 | 13 amps | Up to 3120 Watts |
| 1.5 mm2 | 15 amps | Up to 3600 Watts |
Can you run MC wire outside?
Type MC Cable without an outside nonmetallic jacket can be installed in an “other space used for environmental air” in accordance with Section 300.22(C). These cables can be installed either indoors or outdoors and in exposed and concealed locations.
Can MC cable be supported by zip ties?
Yes, cable ties are permitted. Section 330.30(A) provides the general requirements and permits cable ties.
Does MC cable need conduit?
MC cable comes with built-in protection, so it can be run indoors without a conduit.
