What size rolls does ice and water shield come in?

What size rolls does ice and water shield come in?

GRACE ICE & WATER SHIELD® is supplied in 3 ft wide rolls of varying lengths. Membrane strips are also available in 75 ft (22.9 m) long rolls at widths of 6 in. (150 mm), 9 in. (225 mm), 12 in.

How many feet are in a roll of GAF ice and water shield?

REDUCE HEADACHES

Size
Square Feet Per Rolls 1.5 squares/roll – 150 sq. ft. (13.9 m²) excludes laps
2.0 Square Roll
Width 36″ (.914 m)
Roll Lengths 66.7 ft. (20.33 m)

How many squares does a roll of ice and water shield cover?

Specifications

Manufacturer Grace
Coverage (Square Feet) 200
Installation Method Self-Adhering; Side Laps must be a minimum of 3.5 inches and End Laps a minimum of 6 inches
Installation Temperature 40 degrees Fahrenheit or higher
Package Quantity 1

How long is a 2 square roll of ice and water shield?

36″ x 66.6′
36″ x 66.6′ Ice & Water Shield® Roofing Underlayment – 2 SQ. Roll.

How many feet is in a roll of Storm guard?

Installation & Assembly Videos

Specifications (All Dimensions are Nominal)
Roll Length 66.7′ (20.33 m)
Roll Width 36″ (0.914 m)
Surfacing Patterned synthetic film surface
Square Feet Per Roll 2 squares/roll – 200 sq. ft. (18.58 m²) Excludes laps

How many feet is a roll of weather watch?

x 50 ft., 150 sq. ft. Mineral-Surfaced Peel and Stick Roof Leak Barrier Roll.

Do you put tar paper over ice shield?

Ice and water shield need to be installed before other underlayments, including roofing felt. Tar paper compared to ice and water shield do not stick to anything, whereas ice and water shields are a rubberized membrane that is very sticky to create a waterproof barrier to standing water if installed correctly.

How long is a roll of StormGuard?

How wide is Z Ridge?

10 in.
Videos

Specifications (All Dimensions are Nominal)
Width 10 in. (254 mm)
Length 13 1/4 in. (336.55 mm)
Exposure 5 5/8 in. (142.87 mm)
Linear Feet/Bundle 33.75 lin. ft. (10.3 lin. m)

Is leak barrier the same as ice and water shield?

One of these layers is called a leak barrier, which is often referred to as ice and water shield. Located below the shingles, it’s crucial to your roof system’s defense against moisture. Peel and stick leak barrier can give your roof the upper hand against wind-driven rain and ice.

How many FT does Z ridge cover?

Installation & Assembly Videos

Specifications (All Dimensions are Nominal)
Exposure 5 5/8 in. (142.87 mm)
Linear Feet/Bundle 33.75 lin. ft. (10.3 lin. m)
Nails/Piece Approx. 2
Coverage 3 bundles/100 lin. ft. (30.5 lin. m)

How wide is GAF Z Ridge?

10″
Distinctive 10″ (254 mm) width ridge cap shingles with unique Z-fold design offer the look of thick wood shakes.

How many feet does Owens Corning hip and ridge cover?

Product Information

Nominal Size 12″ x 10 5/8″
Exposure 8″
Pieces per Carton 30
Lineal Feet per Carton 20ft.

How many feet does GAF Z ridge cover?

Videos

Specifications (All Dimensions are Nominal)
Linear Feet/Bundle 33.75 lin. ft. (10.3 lin. m)
Nails/Piece Approx. 2
Coverage 3 bundles/100 lin. ft. (30.5 lin. m)
25-year StainGuard Plus™ Algae Protection Limited Warranty: Yes
  • October 11, 2022