What kind of screws do I use for Trex?
Table of Contents
What kind of screws do I use for Trex?
Trex recommends the use of two screws per joist. Use recommended stainless steel screws in any areas near bodies of saltwater. 2-3/4″ or 3″ screws can be used with Trex 2×6 product.
Can you put screws in Trex?
Trex recommends the use of two screws per joist. All recommended screws are designed to be installed flush with decking surface. DO NOT countersink screws. Use recommended stainless steel screws in any areas near bodies of saltwater.
Are there special screws for composite decking?
Composite decking screws If you opt for composite deck screws, be sure to use stainless steel screws that will not rust or corrode. Select a minimum size of #8 x 2.5 in.
How long should composite deck screws be?
For composite decking, you will need at least 2 1/2-inch screws. Screws also have different diameters, from 1/16 inch (#0) to 5/16 inch (#20). For general decking purposes, you can use a 5/32-inch-wide screw (#10).
How do you frame a deck border?
TRIPLE PICTURE FRAME BLOCKING METHOD
- Add Blocking to Corners. Place a solid block at all four corners of the deck, leaving 15″ clear space between the inside of the block and the inside of the corner.
- Add Corner Support Joist.
- Add Two Flat Blocks.
- Continue Blocking Edge.
- Add Second Support Joist.
- Block Substructure.
What screws for composite decking?
Does composite decking need special screws?
You can screw or nail composite decking boards just like wood ones. Three-inch decking screws are the best fastener choice; they sink a secure distance into the joists and won’t back out like nails. There’s little danger of splitting the boards when driving them, so you don’t need to pre-drill.
What are the best screws to use for composite decking?
If you opt for composite deck screws, be sure to use stainless steel screws that will not rust or corrode. Select a minimum size of #8 x 2.5 in.
What screws to use on decking frame?
A good all-around choice is #10 decking screws—generally in 2 1/2- to 3 1/2-inch lengths. Decking screws are sharp, tapered, self-sinking, and coated for corrosion resistance. With a cordless drill/driver, you can drive them about as fast as nails.
How much overhang should a Trex deck have?
Trex is a popular composite material with a maximum overhang of 102mm or around 4 inches. Between one and two inches of deck board overhang is ideal when you attach an outer fascia board, or at least 1 ¾” to 2 ¾” of overhang before installing the fascia.
What type of screws are best for composite decking?
How do you hide the edges of Trex decking?
Install Fascia Boards Installing fascia boards is a common practice to hide the ends of composite decking boards. Like picture framing, it gives the decking a stylish and sleek look while hiding the exposed ends. The difference is, that you will install it on the sides, directly over the edges and the rim joists.
