What are the TCP IP utilities?
Table of Contents
What are the TCP IP utilities?
Common TCP/IP protocols include the following: Hypertext Transfer Protocol (HTTP) handles the communication between a web server and a web browser. HTTP Secure handles secure communication between a web server and a web browser. File Transfer Protocol handles transmission of files between computers.
What is IP utility with example?
Some TCP/IP Utilities. TCP/IP is actually a suite of protocols that each perform some function to allow computers to communicate with each other. Most vendor’s implementations have quite a few utilities built in. For example, the utilities might relate to configuration information and troubleshooting.
What command displays TCP IP?
Reference article for the ipconfig command, which displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings.
What commands can be used to troubleshoot TCP IP?
After you have TCP/IP installed and configured and you have your TCP/IP network running, it is important to be able to troubleshoot the network….When problems arise on a Windows network, you can use some of the following commands to do your troubleshooting:
- IPCONFIG.
- PING.
- TRACERT.
- NBTSTAT.
- NETSTAT.
- PATHPING.
- NSLOOKUP.
How do I display TCP IP configuration?
How to check TCP/IP configuration with ipconfig on Windows Cloud Servers
- To take the Command Prompt (cmd) , just click on the Windows key to open start and search cmd and then click on the Command Prompt which is shown in the below image.
- ipconfig – Displays the details of IP, subnet mask and default gateway addresses.
How do TCP IP networks work?
How it works. TCP/IP is a two-layered program: the higher layer (TCP) disassembles message content into small “data packets” that are then transmitted over the Internet to be re-assembled by the receiving computer’s TCP back into the message’s original form.
How do I know if TCP IP is enabled?
If the protocols are disabled, then follow the below procedure to enable& check if it works.
- Stop the agent.
- Open the SQL Server Configuration Manager >> SQL Server NetworkConfiguration >> Protocols for MSSQLSERVER >> Right click “TCP/IP” &select “Enable” >> Right click “Named Pipes” & select “Enable”
How do I know if TCP is running?
On a Windows computer Press the Windows key + R, then type “cmd.exe” and click OK. Enter “telnet + IP address or hostname + port number” (e.g., telnet www.example.com 1723 or telnet 10.17. xxx. xxx 5000) to run the telnet command in Command Prompt and test the TCP port status.
What is the difference between ping and traceroute?
Ping is a simple command that can test the reachability of a device on the network. Traceroute is a command you use to ‘trace’ the route that a packet takes when traveling to its destination. It’s useful for tracing network problems, discovering where connections fail, and tracking down latency problems.
