How do you convert cubic feet of gas to kWh?
Table of Contents
How do you convert cubic feet of gas to kWh?
Multiply by volume correction factor (1.02264) Multiply by calorific value (40.0) Divide by kWh conversion factor (3.6)
How many cubic feet are in a kWh?
The answer is: 1 kWh equals 3.41 cu ft N.G.
How many kWh is 1000 cubic feet of natural gas?
Electricity: 293.083 kWh @ 3412 Btu/kWh. Natural Gas: 1 MCF, 10 therms, 1 Dth, or 1,000 cu ft.
How much energy does a cubic foot of natural gas?
1,000 BTU’s
How Natural Gas is Measured
| UNIT OF MEASURE | APPROX. HEAT ENERGY |
|---|---|
| 1 cubic foot | 1,000 BTU’s |
| 100 cubic feet (1 therm) | 100,000 BTU’s |
| 1,000 cubic feet (1 mcf) | 1,000,000 BTU’s |
How is gas kWh calculated?
As an average, we have used 40 megajoules per cubic metre as the calorific value in our calculations. Multiply this figure by 1.02264. This is the correction factor and accounts for temperature and pressure as gas expands and contracts. Convert this figure from gas m3 to kWh by dividing it by 3.6.
How many kWh is a CCF?
One CCF = 100,000 Btus. One therm = 100,000 Btus. One kWh = 1,000 Watts = 3,413 Btus. 100,000 Btus/therm divided by 3,413 Btus/kWh = 29.3 kWhs/therm or CCF.
Is gas measured in kWh?
Your supplier converts the number of gas units you’ve used into kilowatt hours (kWh) and displays this on your gas bill. A kWh is a measurement of energy based on how much energy one kilowatt of gas produces in an hour.
How many kWh is natural gas?
One metric ton of coal can generate 1,927 kilowatt hours of electricity, in comparison to 1,000 cubic feet of natural gas which can generate 99 kilowatt hours.
What is a cubic foot of gas?
A cubic foot of natural gas is the amount of natural gas that can be contained in a cube one foot on a side, at a certain standard temperature and pressure. But gas is not actually produced at a “standard” temperature and pressure.
How many kWh is a unit of gas?
To convert imperial gas meter readings to kWh: Multiply by the volume correction factor (1.02264). Multiply by calorific value (40.0). Divide by kWh conversion factor (3.6).
What is M3 on gas meter?
This type of meter measures gas usage in cubic metres (m3) and normally displays five numbers then a decimal point, followed by more numbers. Digital gas meters will also display the units ‘M3? near the reading. To read the meter, write down the first five numbers reading from left to right including any zeros.
What is a CCF in gas?
Ccf: The most common unit of measurement applied to natural gas usage. This measurement represents a unit of volume equal to one hundred cubic feet. Therm: This measurement is equivalent to one hundred cubic feet or 1 Ccf.
How many KW are in a M3 of gas?
Convert from cubic meters to kilowatt hours (multiply by 11.1868).
Is gas reading in kWh or M3?
Check your meter says ‘M3’ after the reading. If it says ‘KWH’ it’s an electricity meter. If you’re not sure if it’s a smart meter, it might be a standard meter instead. Check how to read a standard gas meter.
How do I calculate gas cost per kWh?
How to work it out
- Take away your last reading from your current reading. This is how many units you’ve used.
- If you’ve got a metric meter (m3), you can ignore this step.
- Multiply this number by the calorific value.
- Multiply this number by 1.02264.
- Divide this number by 3.6.
- Multiply this number by the price-per-kWh.
How do you calculate cubic feet of gas per hour?
To obtain the cubic feet per hour of gas required, divide the input of the appliances by the average Btu (kW. h) heating value per cubic foot of the gas. The average Btu per cubic foot is 1,100.
How do you calculate cubic feet of gas?
For example, if the pipe pressure is 2 psi, add 14.7 to get an absolute pressure of 16.7 psi. For 2 CCF, multiply 2 by 100 to get 200 cubic feet. Then multiply 200 by 16.7 and divide by 14.7. This calculation gives 227.22 cubic feet at the standard pressure of 14.7 psi.
How do you read cubic feet on a gas meter?
To obtain a reading, read the dials left to right, recording the numbers in the same order, left to right. The correct reading for this meter is 2017. This means that 2017 hundred cubic feet (CCF) of gas has passed through the meter since all dials were on zero. Another way to write this amount is 201,700 cubic feet.
