How much oil does a Makita MAC5200 take?
Table of Contents
How much oil does a Makita MAC5200 take?
The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers.
What happens if an air compressor has too much oil?
However, filling your compressors oil sump to the top can cause significant internal damage to your unit. When excess amounts of oil become aerosolized by the compressor’s discharge, it can cause damages not only to your compressor, but to any pneumatic tools and accessories that are hooked up to your compressor.
How much oil do I put in my compressor?
In the middle of the sight glass, you will see a dot. Ideally, you want the oil level to be in the center of the dot. If the oil level is below the dot, your unit needs more oil. If the oil level is above the dot, you have added too much oil.
What PSI should I set my air compressor for tires?
As a general rule, it’s best to use a compressor with a maximum operating pressure of at least 10 PSI higher than the recommended tire pressure. So if your tire needs 100 PSI, you’ll want a compressor capable of generating 110 PSI or higher.
What are the two gauges on my air compressor?
Gauges in industrial air compressors One of them is the pressure gauge to indicate the air pressure in the tank. The other pressure gauge is the pressure gauge that indicates the pressure setting at the regulator. This pressure is the amount of pressure received by the air tool.
How do I know if my compressor needs oil?
It may be found on the base of the pump for reciprocating type compressors or on the sump tank in a rotary screw compressor. In the middle of the sight glass, you will see a dot. Ideally, you want the oil level to be in the center of the dot. If the oil level is below the dot, your unit needs more oil.
