What year was the John Deere L120 made?
Table of Contents
What year was the John Deere L120 made?
John Deere L120 Engine The 20 horsepower CV40 was used in 2003 and 2004, to serial number 150001. The 22 horsepower engine was used in 2005, the final production year.
What size engine does a John Deere L120 have?
Engine Specifications Two different Briggs & Stratton engines were used in the L120 mower, but both deliver 20 horsepower. The Briggs & Stratton CV40 Intek engine used in 2003 and 2004 models has two cylinders, as does the B&S 40 656cc Intek engine used in 2005, the last year the L120 was manufactured.
What transmission is in a L120 John Deere?
John Deere L120 Transmission
Transmission | |
---|---|
Transmission: | Tuff Torq K46 HD |
Type: | belt-driven hydrostatic |
Gears: | infinite forward and reverse |
Oil capacity: | 2.4 qts 2.3 L |
How long is the drive belt on a John Deere L120?
48 in
Belt length (in.) Fits Deck Size (in.) 48 in.
Who makes the John Deere L120?
John Deere L120
Production | |
---|---|
Manufacturer: | John Deere |
Type: | Lawn tractor |
Original price: | $2,299 (2005 ) |
What size battery does a John Deere L120 take?
Compare with similar items
This item ML-U1 200CCA Battery for John Deere L120 22 HP Lawn Tractor and Mower | ML-U1 12V 200CCA Battery for John Deere Lawn and Garden Ride on Mower | |
---|---|---|
Customer Rating | 4.5 out of 5 stars (49) | 4.1 out of 5 stars (18) |
Price | $6499 | $6499 |
Sold By | Mighty Max Battery | Mighty Max Battery |
Voltage | 12 volts | 12 volts |
What does a John Deere L120 weigh?
John Deere L120
Dimensions & Tires | |
---|---|
Weight: | 532 lbs 241 kg |
Front tire: | 16×6.5-8 |
Rear tire: | 22×9.5-12 |
Full dimensions and tires … |
What does a John Deere l120 weigh?
How wide is a John Deere L120?
John Deere L120 Dimensions
Dimensions | |
---|---|
Length: | 60 inches 152 cm |
69 inches 175 cm (2005) | |
Width: | 36 inches 91 cm |
Height: | 38.6 inches 98 cm |
Can you use motor oil in a hydrostatic transmission?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.
Why does my John Deere belt keep breaking?
If your lawn mower belt keeps breaking it could be due to a number of factors including the quality of the belt itself, damaged pulley bearings, rust or sharp edges on pulley grooves, debris building up inside pulley grooves or a weak tensioner spring.
How do you adjust the tension on a John Deere drive belt?
Loosen the center bolt on the transmission drive belt idler arm, but do not remove it. Holding the top of the center bolt-head with the combination wrench while loosening the retaining nut on the underside with a socket wrench is the next task. Push the idler arm forward to align the adjustment bolt holes.
How often should I change the belt on my riding mower?
Under ideal conditions, a mower drive belt will last between three to four years. If you use the mower quite a bit or if you do not take good care of the machine, it may wear out sooner. Wear and tear often makes it hard to keep the mower belt going for longer than four years.