How do you set a Timeguard digital timer?
Table of Contents
How do you set a Timeguard digital timer?
Press and hold the Time button for 3 seconds, the word Hold will show on the screen. After 3 seconds release the Time button and the screen will show the year; Press the Time button repeatedly until the minutes are shown. Use Adv/Ovr or Boost to change the minutes to the correct value.
How do I turn off Timeguard?
One press of the boost button will provide 1 hour of boost, after which the output will turn OFF. Two presses of the boost button will provide 2 hours of boost, after which the output will turn OFF. A third press of the boost button will cancel any boost period and return you to normal operating mode.
How do I set the timer on my immersion heater?
- Push down the red segments on the timer face corresponding to the operating time needed.
- Turn the central clock face so that it is the current time, or rotate the outer disk clockwise so that the solid black arrow points to the current time.
How do you set Timeguard timer with pins?
Decide what times you would like the time switch to switch ON and OFF. Insert a pin in the Inner Circle for an ON period. Insert a pin in the Outer Circle for an OFF period. The minimum switching interval is 30 minutes, and this can be increased in 15 minute steps.
How do you set Timeguard TG77 timer?
To use this feature the TG77 needs to have the clock time set to GMT or Winter Time. Press the “Time” button for around 3 seconds and both the “Time” display and all stored programmes will be changed from 24 hour to AM/PM format.
How do you use a Timeguard thermostat?
To set/alter the time and date at any time, press and hold the Select button for 3 seconds. The display light will illuminate. The hour will to flash, use the Up/Down (+/-) arrow buttons to alter the hour and press the Select button once to confirm.
Is it cheaper to leave immersion heater on all the time?
It’s better to leave the hot water heater on all the time, rather than turning it on and off. This is a very common myth. But in fact, you really don’t need to be heating your water all the time. Your immersion heater or boiler will heat up hot water which is stored in a tank.
How do you set the time on a Timeguard TG77 4?
What is Timeguard FST77?
FST77 – 7 Day Hour Fused Spur Time Switch. Timeguard’s new look Fused Spur Time switches with easy viewing display, optional 1 or 2 hour boost facility and automatic Summer/Winter time changeover. Clearly delivering the tried and trusted features you expect from the Supply Master range.
Does an immersion heater use a lot of electricity?
Immersion heaters are typically 3kW. It costs around 63p to run one for an hour at current electricity prices.
