How do I setup my comtrend 9020?
Table of Contents
How do I setup my comtrend 9020?
3.2 Device Connection
- In this case, we use the example of a personal computer (PC). Turn on your PC (or other device).
- Plug a PowerGrid 9020 unit into the power socket closest to the PC.
- Connect the PowerGrid 9020 to the computer with an Ethernet cable.
- The STATUS LED on the PowerGrid 9020 should now be GREEN or ORANGE.
How do I reset my comtrend powerline adapter?
(1) Do a hard reset by holding the Config Reset Button down for about 10 seconds (the amber AP light starts to flash but keep the button pressed until it stops flashing) then release button. You get 1 red light on (Status) once reset is finished.
How do I access my Comtrend router?
Type 192.168. 1.1 (the most common IP for Comtrend routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Comtrend router is root.
How do I setup my Comtrend wifi extender?
1. Press and hold the WPS button on the Wireless LAN Extender for 2 seconds, the ‘WPS’ LED will start flashing. 2. Press the WPS button on the wireless broadband router or access point you wish to connect to within 2 minutes.
How do I put a password on my Comtrend router?
How do I change the wireless information on my ComTrend Router?
- Enter 192.168. 1.1 in your address bar. Enter Username and Password. Username: root.
- Click on Basic Setup. –
- Click on Wireless. –
- Enter your new SSID (router name) Click Apply/Save. –
- Click Security. Enter password of your choice. Click Apply/Save. –
Where is the password on my Comtrend router?
Comtrend Router Login Guide The default username for your Comtrend router is root. The default password is 12345. Enter the username & password, hit “Enter” and now you should see the control panel of your router.
How do I change the password on my TP Link Powerline Extender?
Please go to Wireless-> Wireless Setting, then you can see the wireless password. For some models, the SSID under the Basic Settings, and password under the Wireless Security setting. You can also change the SSID and password on that page.
How do I log into comtrend AR 5381U?
Configuring the Comtrend AR-5381U Router 1) From a web browser, go to “http://192.168.1.1”. Login with the username “admin” and the password “admin”.
How do I change my ComTrend WIFI name and password?
How do I access my ComTrend router settings?
Connect a computer to your access point using an Ethernet cable. access point’s default IP address is 192.168. 2.2. username is “admin” and the default password is “1234”, though it was recommended that you change the password during setup (see II-2.
How do I access my Comtrend router settings?
How do I find my WiFi extender password?
To find your Extender’s Wi-Fi network password: Log in using your Username and Password. Click Settings then Wireless. Under General, look for WiFi Password. If it says Same as existing network password, it is using the same WiFi password as your main WiFi router.
How do I connect Powerline to WIFI?
Prepare your main powerline adapter by plugging it into the electric socket and connecting the Ethernet cable to the router. Press the pair button on the powerline adapter. Next, plug in the second wireless powerline adapter and press the pair button. Wait for the devices to pair.
