Are LED tail lights submersible?

Are LED tail lights submersible?

When selecting an LED light, if the description states it is waterproof or submersible then the light can be submersed in water. The item you selected, Waterproof, Under 80 Inch LED Trailer Light Kit with 25 Foot Wiring Harness, part # TLL9RK, has encased LED diodes.

Are waterproof trailer lights submersible?

When it comes to trailer taillights the terms waterproof and submersible are somewhat interchangeable. If a taillight is considered submersible that means that the internal circuits are waterproof and would be protected for if you were to back the trailer into water like when launching a boat.

Do boat trailer wires need to be waterproof?

Whether or not it is water proof depends on the trailer, the construction, how it is wired, and if the taillight housings are waterproof. You can use shrink tubing, a good amount of electrical tape, or Liquid Electrical Tape, # SWC50122, to help keep out moisture where wires are connected or exposed.

Can trailer wiring get wet?

Trailer wire is no place to skimp on quality. As the trailer wiring is likely to get wet from launching and the elements, use tinned cable to impede corrosion. Also avoid simply twisting wires together as a temporary fix — and don’t use wire nuts. Instead, use properly sized crimp connectors.

Whats the difference between waterproof and submersible?

A submersible tail light can let water in, there is usually a hole at a low point so the water can drain out. A waterproof light should be sealed to keep out water. For either type, you would also want to seal out water where the tail light wiring splices into the trailer wiring.

Are Hopkins trailer lights waterproof?

The lamps feature a waterproof, sealed capsule preventing premature bulb failure and corrosion. The kit includes two submersible stop/tail/turn lights (B80/B90), a 20 ft. wire harness, license plate bracket, mounting hardware, and trilingual instructions- everything needed for easy installation and DOT compliance.

Should you unplug trailer lights before backing into water?

Butch Wheeles of Wheeless Trailer Sales & Repair in Springfield, Oregon says, “Most definitely, unplug them.” He notes that if you still have incandescent bulbs, you should always unplug your lights because when they’re hot and cool water gets in, the bulbs pop.

  • August 27, 2022