What is Polyvine used for?

What is Polyvine used for?

Polyvine Decorators Varnish is a water-based coating for use on a variety of decorative surfaces. Ideal for applying over emulsion paints, wallcoverings, fabric and plaster where it protects against scuffs and stains. Also ideal as a plaster and fabric primer, a fabric stiffener and also protects wood.

What is a Polyvine finish?

The Polyvine Heavy Duty Floor Varnish is an ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish.

How long does Polyvine take to cure?

Cure Time: Up to 5 days @ 20°C / 70°F Recoat Time: Up to 2 Hours @ 20°C / 70°F Hardness: Highly Durable, Cross Linked No fire hazard Before or during use, or in the cured state. High gloss for a shiny finish, satin for depth and a soft sheen. 500ml, 1L, 4L.

Is Polyvine a polyurethane?

A heavy duty water-based polyurethane varnish for interior and exterior use.

Is Polyvine a non yellowing varnish?

a non-yellowing, quick drying clear finish that protects against UV light and weather damage.

Can you apply Polyvine with a roller?

A few tips and observations about Polyvine: Just apply with a paintbrush or small roller when the paint on your project is thoroughly dry. And the best part, your brushes will just wash out in water!

Can you paint over Polyvine?

A few tips and observations about Polyvine: It goes on like silk, dries quickly, smoothly, and no need to buff. Just apply with a paintbrush or small roller when the paint on your project is thoroughly dry.

Is Polyvine varnish heat resistant?

Heavy duty varnish which dries crystal clear and is both heat and water resistant.

How do you apply dead flat varnish?

Dead Flat Varnish can be applied by brush, roller, or HVLP spray gun. Do not apply when air and surface temperature are below 50°F (10°C) or high humidity conditions exist. Optimal application conditions are 60 to 80°F (16 to 27°C) and 30 to 60% relative humidity. For most applications, thinning is not necessary.

What is a dead flat finish?

Dead Flat is a delicate coating designed to draw interest. It is blended from an alkyd resin to recreate an 18th-century paint finish, and is suitable for interior wood trim, plaster, and metal.

What is the difference between dead flat finish and flat finish?

Dead flat is a coating or paint with absolutely no gloss or sheen. Ceiling paints are dead flat paints. A dead flat paint hides lapping marks and roller directional pattern (as well as other application imperfections) better than a standard flat paint.

Which is better flat or semi gloss?

A flat paint finish tends to absorb light, while a semigloss finish reflects light. Flat finishes can help to camouflage minor surface imperfections, such as dings, drywall seams and other flaws. Conversely, semigloss finishes are inclined to make wall blemishes even more pronounced.

Is flat or matte finish better?

Matte paint usually has very low-gloss, but it has more shine than a flat paint finish. As these types of paints have a low-gloss, they are the best to cover the imperfections of your wall. This is because these paints absorb light rather than reflecting.

Why do contractors use flat paint?

Reason #1 for Why Builders Use Flat Paint – Builders use flat paint so that they can touch-up the walls easily. Flat paint, although it is inferior in many ways, is the best at touching-up. The lack of shine make the paint blend better with the previous paint.

What happens if I paint flat over semi gloss?

Flat paint needs a rough surface for it to stick properly. If the area is not sanded and the flat paint is applied directly over the semigloss finish, your risk of paint peeling becomes greater, and you will have to refinish it.

What does dead flat paint mean?

When should you use flat paint?

You should be using flat paint on walls and areas that have a lot of bumps, scratches, or holes. Since it can conceal these blemishes easily, it’ll be the one paint finish you’ll want to be using. It’s best for low-traffic rooms that have a ton of light like offices and more formal rooms, like dining rooms.

What paint do house builders use?

Contract matt emulsion, the most common type of paint used on new-builds, is microporous, which means moisture in the wall can dry without causing the paint to bubble (as would be the case with the vinyl-based paints you’ll be more familiar with.