How much horsepower does a 455 Olds have?

How much horsepower does a 455 Olds have?

As was common practice at the time, Oldsmobile manufactured a number of 455 variants, altering compression ratios, piston designs, and intakes depending on which application the motor was used for. Factory horsepower ratings ranged from 310 all the way up to 400 ponies, with 500 lb-ft the most common torque figure.

How fast does a Cutlass go?

According to ProfessCars™ estimation this Oldsmobile is capable of accelerating from 0 to 60 mph in 10.1 sec, from 0 to 100 km/h in 10.7 sec, from 0 to 160 km/h (100 mph) in 31.9 sec and the quarter mile drag time is 17.5 sec.

How much torque does a 455 have?

The 455 was good fro as much as 360hp and 510 lb-ft of torque, with the highest output found in the Buick GS Stage 1.

What engine was in a 1970 Olds 442?

Olds 455 V8
The 1970 Olds 442 was the pinnacle of performance from Oldsmobile. GM dropped the regulation of no more than 400ci, so Olds responded with the Olds 455 V8 as the standard engine! Output was 365 hp and 500 lb-ft of torque with a 370 hp variant available with the W-30 option.

How fast is a Cutlass 4-4-2?

According to ProfessCars™ estimation this Oldsmobile is capable of accelerating from 0 to 60 mph in 9 sec, from 0 to 100 km/h in 9.7 sec, from 0 to 160 km/h (100 mph) in 31.2 sec and the quarter mile drag time is 16.7 sec.

How much horsepower does a 4-4-2 have?

Top speed was reported as 115 mph (185 km/h). The base engine was still rated at 350 hp (261 kW), but only with the standard three-speed and optional four-speed; automatics were rated at 325 hp (242 kW). W-30s were rated again at 360 hp (268 kW).

Is a 455 A big block?

That’s right, the 455 was not a big block because Pontiac never had a big block. Or a small block. Throughout its entire existence, Pontiac only ever manufactured a single V8 engine family!

How much horsepower does a 1970 442 have?

365 hp