How do I fix error code P0304?
Table of Contents
How do I fix error code P0304?
What repairs can fix the P0304 code?
- Spark plugs replacement.
- Replacement of cap & rotor, coil pack, plug wires (depending on vehicle)
- Repair of engine mechanical issues.
- Fixing air leaks.
- Repair of fueling faults.
How serious is P0304 code?
Issue Severity: SEVERE. Do not keep driving with this error code. Repair Urgency: Fix this code immediately (same-day if possible) to avoid serious engine damage and dangerous driving conditions. Diagnosis: A multiple misfire can be caused by anything from faulty spark plugs to low engine compression.
How much does it cost to fix a cylinder 4 misfire?
Depending on the exact cause, it could be anywhere from $20 to $700 or more to fix a cylinder 4 misfire.
Can bad gas cause a misfire?
A tank of “bad gas” (incorrect octane or old gasoline) can cause a misfire. Weak or dirty fuel injectors can restrict the flow of fuel into the cylinder leading to the wrong air/fuel ratio.
Which cylinder is P0304?
Cylinder 4 Misfire Detected
What Does the P0304 Code Mean? Diagnostic trouble code (DTC) P0304 stands for “Cylinder 4 Misfire Detected.” The code indicates that the powertrain control module (PCM) has counted enough misfire events on cylinder 4 to store the misfire code for that cylinder.
Is a misfire easy to fix?
Repairing a misfiring engine can be simple or complicated, depending on the reason it is misfiring. The most common causes of engine misfires are: worn spark plugs, weak fuel injector, vacuum leak, worn valve seals, carbon tracking, and no voltage at the coil.
Will new spark plugs fix misfire?
If your engine is misfiring, you may be able to fix the problem easily by replacing your spark plugs. Spark plugs are relatively easy to remove from engines and inspect for damage, and at less than $25 a piece, they are relatively cheap to replace, too.
Can a misfire clear itself?
Once the problem is repaired or no longer detected, the misfiring code will clear itself after some driving.
What can go wrong changing spark plugs?
It’s possible to damage the threads inside the engine when installing the spark plug. And that can be a costly mistake. Also, the engine must be cool before removing the spark plugs or thread damage may result. , if dirt or debris gets into the spark plug well, it can get into the engine, causing damage, as well.
