How do I reset my Epson L355 printer?

How do I reset my Epson L355 printer?

To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero. The process should be instant and you should immediately see a dialog box popping up.

How do I print on an Epson L355?

The L355 is easy to set-up and use: simply fill with the ink supplied, turn the printer on and prime the ink system. Now the L355 is ready to print. The Epson’s ink bottles make it easy to refill the ink tank with their clear labelling and drip-free nozzle.

Why will my Epson printer not Scan to my computer?

You Cannot Start Epson Scan Turn off your computer and scanner, then check the USB cable connection between them to make sure it is secure. The scanner may not work properly when your computer is in standby mode (Windows) or sleep mode (Mac OS X). Restart Epson Scan and try scanning again.

How do I Scan from my Epson printer to my computer?

Scanning to a Connected Computer

1. Place your original on the product for scanning.
2. Press the home button, if necessary.
3. Select Scan.
4. Select Computer.
5. Select OK to close the information screen, if necessary.
6. Select Select a computer and choose one of the following options:

How do I connect my Epson l355 to WIFI?

Setup automatically by using a push button

1. 1 Hold down the [WPS] button on the access point (wireless router) until the security light flashes.
2. 2 Press the [Wi-Fi] button on the printer until the light and the light flash alternately (approximately 3 seconds).
3. 3 Wait until the process ends.

How do I reset my Epson l355 WIFI?

Restoring Default Wireless Network Settings

1. Press the power button to turn off your product.
2. Press and hold the network status button and press the power button to turn your product back on. The network settings are restored to their factory defaults and your product turns on.

How do I reset my Epson l355 WiFi?

What does the blinking light on my printer mean?

The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state.

How do I connect my Epson scanner to my laptop?

Epson Scan: Network setup

1. Open Epson Scan Settings.
2. Select your all in one printer or scanner from the drop down list. Note:
3. Set Connection Type to Network.
4. Click Add.
5. Click the IP address in the list and click OK. Note:
6. Click Test. Successful Test.
7. Expand the section below depending on the test results.

Why won’t my Epson printer scan to my computer?

Make sure the scanner is turned on. Turn off your computer and scanner, then check the USB cable connection between them to make sure it is secure. The scanner may not work properly when your computer is in standby mode (Windows) or sleep mode (Mac OS X). Restart Epson Scan and try scanning again.