How much does it cost to replace the torsion spring on a garage door?
Table of Contents
How much does it cost to replace the torsion spring on a garage door?
$75 to $150 per spring
Torsion Spring and Bar Replacement torsion springs cost $30 to $100 each, and replacing them will cost $75 to $150 per spring, including labor and materials. Top-rated garage door repair experts are here to help. Get free, no-commitment estimates from pros near you.
Can I open my garage door with a broken torsion spring?
A garage door with a broken spring should not be opened or closed using an automatic operator. All though some openers can lift the door, you risk damage to the operator and the door.
How long do garage door torsion springs last?
between 7 to 12 years
Torsion springs usually have 5,000-20,000 cycles which means they can last between 7 to 12 years (and even more).
Can you replace just one torsion spring on a garage door?
Yes. You may be tempted to save money on parts and labor by replacing just one spring, but you’ll likely need to replace both when one spring breaks.
Should you replace both garage door springs at the same time?
When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.
How long does it take to replace a garage door spring?
Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.
How do I know if my torsion springs are bad?
Door Slams Down Quickly Torsion springs balance the weight of your garage door, preventing it from closing too quickly. When springs malfunction, there is not enough resistance. Speed cannot be controlled without this resistance.
Should I replace both springs on my garage door when one breaks?
Yes, you might be tempted to save some money on labor and parts by replacing just one spring, but you should replace both garage door springs when one breaks. Garage doors have two springs (left and right-wound), one on either side of the door. The springs exert the force that makes your door light enough to be lifted.
Can I replace a garage door spring myself?
You can definitely replace garage door springs on your own, but it can be a bit tricky and dangerous, and the skill required depends a lot on the type of springs that you have.
Can you replace garage door springs yourself?
How much do garage door springs cost?
Replacing garage door springs costs $150 to $350 on average. The springs alone typically run $30 to $75 each, but you may find them as low as $15 and up to $100 each. Commercial grade springs can run $300 or more. Keep in mind that most doors have two springs and you’ll need to replace both at the same time.
Why is my garage door so heavy to lift?
Cause: Garage torsion springs are vital aspects of the garage opening system, as no other part of the mechanism is strong enough to lift the heavy door. When a torsion spring suffers a failure or breakage, you may notice that your garage feels much weightier to lift, or it simply won’t open at all.
How do I know if my garage door springs need to be replaced?
Here are five signs that a set of springs is ready to go.
- You Hear the Garage Door Opener Strain.
- The Door Slams Shut Without Warning.
- You Hear a Loud Popping Sound When the Door Is Closed.
- The Door Feels Heavier.
- You Can’t Rest the Door in the Mid-Level Position.
- How Often Should You Replace Torsion Springs?
How much should a garage door spring cost?
$150 to $350
Replacing garage door springs costs $150 to $350 on average. The springs alone typically run $30 to $75 each, but you may find them as low as $15 and up to $100 each. Commercial grade springs can run $300 or more.
What does a broken torsion spring look like?
If your garage door’s torsion spring is broken you will likely notice the following: Usually the automatic garage door opener will not open the door. When you disconnect the opener and raise the door manually, the door won’t stay in the up position. You will see the split in the spring when viewing it.
