What is a Dana 30 made of?

What is a Dana 30 made of?

Product Description. The Barnes 4WD Pro Series Jeep Dana 30 Front Axle Truss is made from a combination of 1/4″ and 3/16″ steel to keep them light but incredibly strong.

What is the difference between a Dana 30 and a Dana 44?

The only difference between the JK Dana 30 and Dana 44 is ring gear size, electronic locker, and bigger shafts. (even if she insists shaft size doesn’t matter…) You’re better off just starting with an aftermarket Dana 44 that is a “true 44”.

Is Dana 44 better than Dana 35?

It may not sound like a big difference, but it’s actually a pretty big. Although the Dana 44 has a larger differential, and stronger axle shafts, it shares the same weak axle tubes with the Dana 35. You could always truss the axle to make it stronger, but at the end of the day, it’ll still have really weeks tubes.

Are Dana 30 and Dana 44 ball joints the same?

Knows a couple things… The TJ’s D30 ball joints are the same as the Rubicon’s front D44 ball joints. That is because the only parts on a Rubicon front Dana 44 that are Dana 44 include the pumpkin, gears, and inside axle shaft. Everything else on the Rubicon’s front Dana 44 is pure Dana 30.

How can you tell Dana 30 from Dana 44?

The quickest way to tell is to look at the top of the steering knuckles where the Front End Housing is connected to the Knuckle. On a Dana 44 Model, you will see a large castle nut threaded onto a ball joint. For Dana 30 Models, you will see a king pin cap with four bolts threaded down into the top of the knuckle.

How much does a D30 weigh?

What might be the most impressive feature of the Gain D30 is the weight at just 30.5 lbs. This is achieved by the ultra-light weight Ebikemotion drive system, weighing less than 8 lbs.

What vehicle has a Dana 30?

Jeep Liberty 4×4 models
Jeep Liberty 4×4 models use the Dana 30 in the form of independent suspension in the front (IFS). The AMC Eagle front axle is also a Dana 30 IFS.

What’s the difference between a Dana 30 and a Dana 44?