What is Suniso oil?

What is Suniso oil?

Suniso mineral oils are manufactured from well-refined petroleum lubricating oil stocks, while the synthetic ones are based on the finest synthetic base stocks. All represent the best choice among available compressor lubricants.

What refrigerant is compatible with mineral oil?

Alkylbenzene (AB) – is a synthetic oil suitable for refrigeration systems using CFC or HCFC refrigerants. It is compatible with mineral oil and compared to mineral oil, it has improved refrigerant miscibility with R-22 at low-temperature conditions.

What oil does R123 use?

mineral oil
CFC refrigerants such as R12, R13, R113, R114 and R115 are using mineral oil or alkylbenze as their lubricants. Similarly, HCFC refrigerants such as R22, R123, R401A and R409A are also using these lubricants in their design.

What oil is used in R-22 refrigerant?

R22 air conditioners use mineral oil and R410A systems use synthetic oil. The synthetic oil is generally more soluble with R410A than mineral oil is with R22.

Can you mix different refrigerant oils?

The short-long-only answer is no, never. There are many reasons why it’s impractical, illegal, and not economical for a homeowner to mix refrigerant types. CFC-type refrigerants like R-22 – the most popular in the United States by far – are a single type of refrigerant.

What refrigerant can be mixed with R-410A?

You can mix R-22 and R-410a refrigerant in the same system.

Does 410 use POE oil?

With the new regulations approaching, POE oils are the optimal lubricant choice for use with the new generation of chlorine-free HFC refrigerants, particularly R-410A.

Can you mix mineral oil with ester oil?

Ester oil mixes with and is compatible with mineral oil. Ester oil can be used with R12 and R134a refrigerants. Ester oil is not as harsh to o-rings, seals and paints as PAG oils. This is the oil that comes in or is supplied with the compressors that come from Everco, Murray, and Four Seasons.

Can you mix ester and PAG oil?

Ester oil and Pag are compatible,so you shouldn’t have a problem with that. Unless you have a leak,adding oil will only hurt the system.

Can you run R22 with POE oil?

The refrigerant R-22 is compatible with POE oils.

Does R22 use mineral oil?

Refrigerant R-22 has been successfully used with mineral oil in residential air-conditioning and heat pump systems (AC/HP).

What happens if you put 410A in a R-22 system?

If you put R410-A into an R-22 system, the parts will rupture due to the increased force. You can convert your current system to one that runs on R-410A, but the cost will be high.

What would happens if you put R-22 in a 410A system?

If you use R-22 in the same system as R-410a, the compressor is going to be trying to work two different fluids through the same coils as both refrigerants respond differently to different mechanical situations. As you might imagine, this isn’t going to go well for your air conditioner or heat pump.