How do I reset my Astro beyond decoder?

How do I reset my Astro beyond decoder?

‍On your remote, press the HOME button and the home menu will be displayed on top of your screen. ‍Navigate to Settings. Navigate to Reset and press “OK”. Select Restore Factory Settings and press “OK”.

How do I reset my Astro?

Switch on the power of your box and ensure the adapter’s power light is on. Press and hold the Ch+ and Ch- keys on the box simultaneously when the “boot” message appears on the front panel. Wait until the “Clr” message appears on the front panel, then release the Ch+ and Ch- keys.

What should I do if my Astro remote is not working?

Check if you can change channel using your Astro remote control. If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any). If it’s working, you might need to replace your Astro remote. This might be due to a faulty Astro remote.

How do I update my Astro beyond decoder?

​1) Reboot your Astro set top box (STB) until “boot” appears at the front panel. 2) On Astro remote control, press and hold “Power” button continuously for few seconds, until “Startup Options” page appears on your TV screen. 3) Press 1 to download software update.

What is the SSID for Wi-Fi?

From the Apps menu, select “Settings”. Select “Wi-Fi”. Within the list of networks, look for the network name listed next to “Connected”. This is your network’s SSID.

How do I factory reset my Astro Box?

Restore factory settings – HD enabled Box

1. Press “HOME” button on your remote control.
2. Navigate to Settings and press “OK”.
3. Navigate to Installation Settings and press “OK”.
4. Enter your PIN to access this setting.
5. Navigate to Restore Factory Settings and press “OK”.

Why is my decoder not responding to my remote?

You may also need to press the CABLE button at the top of the remote to direct the signal to the receiver and then try a few functions (Guide, Menu/Settings, etc.) to see if it is only certain buttons that do not work. Failing this, you can try resetting your receiver. Unplug your receiver and wait 15 seconds.

How do I update my ultra box software?

To upgrade your storage space, please call us at 03 7490 8102, or login at selfservice.astro.com.my, and select Subscription -> Astro Cloud. The current upgrade options are as below, and will be shared across all your household devices (Ultra Box and mobile devices with Astro GO).

How do you update Astro channels?

How do I request for a service upgrade?

1. Tune to Astro channel 200 – select on “Add On”
2. Click “HD-PVR Service”,”Multiroom”, “Astro IPTV”, or “Astro + Broadband” and press”OK”
3. Submit the WhatsApp or SMS code as per displayed on the TVscreen.

How do I find my Astro signal?

Check signal level – HD enabled Box

1. On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.
2. Navigate to SETTINGS and press “OK”.
3. Navigate to STB DIAGNOSTICS and press “OK”.
4. Refer to the signal strength % shown on the top left of your screen.

How do I reset my SSID?

How do I change to my WiFi SSID?

1. Using your computer or mobile device, open a web browser.
2. On the address bar, type the Router IP address you took note on the previous step then press ENTER.
3. Go to Wireless menu option.
4. Change the default SSID name in the Wireless Network Name (SSID) field.

Where do I find SSID on router?

Look for a sticker on your router. Left-click the wireless signal icon (most often located in bottom right corner of the desktop). Within the list of networks, look for the network name listed next to Connected. This is your network’s SSID.

How do I reconnect my Astro?

How do I reconnect my account?

1. Send SMS to 66688.
2. Type ASTRORCO10-Digit Astro Account No.