What do you do when your subwoofer stops working?

What do you do when your subwoofer stops working?

If the subwoofer still doesn’t power on, try plugging it into a different outlet that you know works properly. As with the speaker wires, inspect the subwoofer’s power cable for any damage or defects. Some subwoofers are equipped with a fuse, which may or may not require removal of a back plate.

Why did my bass stop working in my car?

Loose connections could make the bass go, come back, and go again. For example, the connections breaks, then makes, then breaks again. OR the amp is going into protection, then was OK, now in protection again (because a speaker wire shorted, or a ground came loose, or whatever).

Why is my subwoofer not making any sound?

Ensure the subwoofer has not been muted. Increase the volume level on the subwoofer. Ensure the speaker settings on the stereo system or TV have been configured properly to use the subwoofer. IMPORTANT: Certain speaker settings may disable the subwoofer.

Why is there no sound coming from my subwoofer?

How do you reset a subwoofer?

Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds. Plug in the power cord and turn on the soundbar.

Why does my sub have power but no sound?

Due to heavy vibrations and overheating, the wires of the speakers can get affected. Once the speakers stop working, the subwoofer won’t work as everything is connected. Therefore, thoroughly check all the wires and cables and the input ports of the speakers. Make sure they are connected correctly.

How do I reset my Onn subwoofer?

If you run into a pairing issues it is important to unplug everything from the main unit (all HMDI and other connections except for power) and reset the bar by pressing and holding three buttons (volume up and down and source) until the device shows that is has reset. Unplug the power cable and unplug the subwoofer.

How can you tell if a sub fuse is blown?

Test the sound at a low volume to listen for whether your sub has been blown. If it is distorted, you have a partially blown subwoofer, and if there is no sound at all, it is completely blown. If the subwoofer is receiving its signal via a cable, then check the cable before rushing to conclusions.

Do subwoofers have fuses?

Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks.