Can you use a multimeter as a megger?
Table of Contents
Can you use a multimeter as a megger?
The multimeter can be used as an ammeter, an ohm meter, or a voltmeter. Meggers are used to measure insulation resistance.
Can multimeter be used for insulation resistance test?
There is a family of test instruments designed to measure resistance into the billions of ohms or Giga-ohms far beyond the range of normal meters for testing insulation. These devices are called Insulation Multimeters, or MegaOhmmeters, or commonly ‘Meggers. ‘
What is the difference between ohmmeter and megger?
Checking correct operation Impedence of insulation is very high. A megger is specifically designed to accurately measure high impedences. An ordinary multimeter is designed to measure lower, more finite impedences. Therefore a megger is more accurate for the application.
How do you read a Megger tester?
If the megger reads a resistance under 1 (1,000 ohms) on your meter after the initial 60-second interval, the cable has failed and the cable should be removed. If the megger reads a resistance between 1-1.25 on your meter, then the cable passes. Any reading above 1.25 is considered excellent.
How do you test Megger insulation?
How to Use a Megohmmeter
- Cut power. Make sure you eliminate any voltage running through the wires you want to test.
- Uninstall wires. Disconnect the wires you want to test from both ends of the circuit and all feeding wires in motors.
- Connect the ground lead.
- Connect to conductor.
- Build voltage.
- Read meter.
- Complete testing.
What is the difference between a megger and ohmmeter?
Impedence of insulation is very high. A megger is specifically designed to accurately measure high impedences. An ordinary multimeter is designed to measure lower, more finite impedences. Therefore a megger is more accurate for the application.
What is a megger used for?
A megger is used to measure insulation resistance and it is powered by a inbuilt DC generator or battery of a higher voltage range, it is called Megohmmeter.
What are good megger readings?
Anything reading between 2 megohms and 1000 megohms is usually considered a good reading, unless other problems have been noted. Anything less than 2 megohms indicates an insulation problem.
What is the reading of acceptable value of megger test?
The rule may be stated: Insulation resistance should be approximately one megohm for each 1,000 volts of operating voltage, with a minimum value of one megohm. For example, a motor rated at 2,400 volts should have a minimum insulation resistance of 2.4 megohms.
