How do I boot my Acer Aspire E1 531?

How do I boot my Acer Aspire E1 531?

Press the F10 key to save changes and restart the system. Install the new hard disk, plug in the bootable USB, power On the laptop, When the Acer logo appears press F12 immediately and repeatedly until get into Boot Option and check if you can boot from USB and install windows.

How do I enable VT on my Acer Aspire E1 531?

Select Task Manager. Click the Performance tab. Click CPU. The status will be listed under the graph and will say “Virtualization: Enabled” if this feature is enabled.

How do I force my Acer laptop to boot from USB?

Plug in your USB drive and turn on the laptop. Press F12 after the splash screen. Using the cursor keys, select the USB drive (It may display as the USB drive manufacturer – Kingston, Adata, Sandisk, etc.) Press Enter and the laptop should boot up from your USB.

Why is my laptop saying no bootable device?

BIOS is a program in computers used to load the operating system and execute the boot operation. The “no bootable device found” error is actually reported by BIOS. It means BIOS cannot find or locate the boot device or the boot files on the boot device are incorrect.

How do I enable virtualization in BIOS on Acer laptop?

Enable Virtualization Technology for Intel Processors

1. Press and hold the power button for 5 seconds until your computer completely powers off.
2. Power your computer on and press the F2 to enter BIOS setup menu.
3. Select Advanced page.
4. Enable the Intel VTX and Intel VTD settings.
5. Press F10 to save & exit.

How do I enable VT on my Acer?

Acer

1. Turn ON the System.
2. Press F2 key at startup BIOS Setup.
3. Press the right arrow key to System Configuration tab, Select Virtualization Technology and then press the Enterkey.
4. Select Enabled and press the Enter key.
5. Press the F10 key and select Yes and press the Enter key to save changes and Reboot into Windows.

How do I fix an Acer no bootable device?

1. ▌Method 1. Disconnect all USB peripherals.
2. ▌Method 2. Check for loose cables.
3. ▌Method 3. Set right hard drive as the first boot device.
4. ▌Method 4. Reset primary partition as active.
5. ▌Method 5. Run SFC command to repair corrupted boot files.
6. ▌Method 6. Fix damaged MBR.
7. ▌Method 7.
8. ▌Method 8.

What key do you hit to get into BIOS?

Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.