How do I care for my Awlcraft 2000?

How do I care for my Awlcraft 2000?

For Awlgrip AND Awlcraft 2000 Apply cleaning solvents with soft clean cloths. Wipe up solvent quickly. Do not allow solvent to dry on the surface or puddle and soak into the surface. After the use of solvents, wash these areas with Awlwash (73234) and water to remove any residue.

How long does Awlcraft 2000 take to cure?

Recommended Dry Film Thickness: 2-3 mils (50-75 microns) total of 2-3 coats. Anticipated Cure Time at 77 ¡ F, 50% R.H: 24 Hours to tape free; 3 days to light service; 14 days for full cure. Recoatability: Spray applications consist of two to three coats applied over 1-4 hours.

Can you polish Awlcraft?

Do not use polishing compounds on Awlgrip G/H Line topcoat. Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand.

Can Awlcraft 2000 be rolled?

You can’t roll/tip AwlCraft 2000 and it is not as durable as Awlgrip.

Can Awlgrip be buffed?

Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand. Never apply or buff Awlcare with a machine.

How long does it take for Awlgrip to cure?

Anticipated Cure Time at 77°F/50% R.H: 24 hours to tape free; 3 days to light service; 14 days for full cure. Recoatability: Spray applications consist of three or more coats applied over 1-4 hours. Exact time will vary with temperature, project size, and film thickness applied.

Can you wet sand and buff Awlcraft 2000?

As long as it Awlcraft 2000 it can be wet sanded. There is another Awlgrip paint that can not be wet sanded. So I would make sure you test spot first.

How do you mix Awlcraft?

Mix by volume two parts Awlcraft 2000 Base with one part Awlcat #2 (G3010) Spray Converter to a smooth, homogenous mixture.

Can you brush Awlcraft 2000?

So, Awlcraft 2000 is more suited for buffing and Awlgrip will require a Fairing Compound. Can be applied by spray or brush/roll. Excellent color retention and chemical resistance.

Can Awlcraft 2000 be brushed?

Can you sand Awlcraft 2000?

As long as it Awlcraft 2000 it can be wet sanded. There is another Awlgrip paint that can not be wet sanded.

How long will Awlgrip last?

Apply a topcoat. Awlgrip – may be brush rolled or sprayed – usually lasts 7-10 years.

How do I restore Awlgrip paint?

You can restore the gloss of a freshly painted boat and prevent the premature aging caused by contaminates by following these steps: Wash your Awlgrip or Awlcraft surface with Awlwash mixed with water (1-2 capfuls in a bucket of water for washing) using soft, non-abrasive cloths and rinse well.

Can you roll Awlgrip?

Apply a light, smooth coat of Awlgrip by spray, brush, or roller (specified for use with urethanes and epoxies, such as a solvent-safe foam roller). Allow the topcoat to flash off for 10-20 minutes until the surface is slightly dry but still tacky.

  • August 9, 2022