How do I fix Indesit error F05?
Table of Contents
How do I fix Indesit error F05?
Indesit error F05 or F11 On the front side of the machine, open the hatch in front of the drain filter and unscrew the filter. Drain the excess water and collect it. Check if there’s a pin, coin or button in the drain and remove it. Clean and replace the drain filter.
What does F 51 on a washer mean?
When your washer is overloaded, the rotor cannot spin the washer drum around correctly, and an F51 error code will result. To check if your washer is overloaded, make sure that it isn’t overly full (more than 80% full to the top), and if it is, remove some items and then try to turn your washer on again.
What does error code F05 mean on a Indesit washing machine?
F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).
What does F5 and E2 mean on a washing machine?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
What does error code F51 mean?
Error code F51 means that the rotor position sensor has a connection error. This connection error causes miscommunication between the sensor and the electronic control.
What does F51 mean?
The F51 error may indicate there is a MOTOR ROTOR POSITION SENSOR FAILURE (RPS). The sensor and control board has a connection or fault issue. This error can be cleared by cleaning/reconnecting the sensor OR replacing it. Make sure the control board and the RPS have a good connection.
What is rotor position sensor?
The high-speed rotor position sensor measures the angular position of the rotor shaft in synchronous electric motors. The sensor signal is required for driving the e-machine torque control used in electric and hybrid vehicles.
How do you unclog a washing machine drain line?
To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it. Yes?
