How do I get my Samsung surround sound to work?
Table of Contents
How do I get my Samsung surround sound to work?
With the TV and soundbar turned on, connect one end of a digital optical cable to the OPTICAL OUT port on the TV. Then, connect the other end to the DIGITAL AUDIO IN (OPTICAL) port on the soundbar. Press Source on the remote or soundbar, and then set the soundbar to the D.IN. Setting.
Why does my Samsung have no sound?
If the no sound issue on your Samsung Galaxy phone is limited to one or two apps, then you can check the Separate App Sound settings on your phone. When enabled, this feature allows you to play sounds from that specific app through a different audio device other than your phone. Here’s how you can disable it.
How can I get my TV to play sound through home theater?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.
How do I get my surround sound to work?
Note: This is an example of how to change this setting on an Android TV:
- On the remote control, press the HOME button.
- Select Settings.
- The next steps depend on your TV menu options: Select Display & Sound → Audio output → Speakers → Audio system. Select Sound → Speakers → Audio system.
Why won’t my rear surround sound speakers work?
Try selecting a different size (small or large) for the rear surround speakers in the menu. Verify that the A/V receiver is set to a surround sound mode. IMPORTANT: For Dolby® ProLogic surround sound, the center-channel mode must be set to NORMAL or WIDE.
Why are my rear speakers not working?
Turn up the rear speakers output volume: maybe the volume for the rear speakers is too low? Go into the amplifier setup menu and turn up the rear speaker volume. Check the wiring: make sure you have connected the correct output channels on the amplifier to your rear speakers. Maybe run some new speaker wire?
How do I reset my home theater?
Follow this procedure to reset the DVD home theatre system to the factory default specifications.
- While the DVD player is in the stop mode, press the DVD SETUP button.
- Press the UP ARROW or DOWN ARROW to select SETUP .
- Press the ENTER button.
- Press the UP ARROW or DOWN ARROW to select RESET .
- Press the ENTER button.
How do I enable arc on my Samsung TV?
Open Menu> Sound> Speaker Settings. Set the TV sound output to the receiver. Open Menu> System> Anynet + (HDMI-CEC). Set the Receiver function to On….Audio formats supported by HDMI ARC:
- PCM (2 channel)
- Dolby Digital (up to 5.1 channel)
- DTS Digital Surround (up to 5.1 channel)
How do I enable HDMI ARC on Samsung TV?
Open Home> Settings> Sound> Speaker Settings. Select Receiver (HDMI) from the list. Open Menu> Sound> Speaker List. Select Receiver (HDMI) from the list….Audio formats supported by HDMI ARC:
- PCM (2 channel)
- Dolby Digital (up to 5.1 channel)
- DTS Digital Surround (up to 5.1 channel)
Why is my media silent?
The problem seems to be somehow caused by an app. If you close the right app the media volume slider becomes unstuck. If you are having trouble finding the right app, look for any app having to do with sound. If you still can’t, find the specific app keep closing apps until the media volume becomes unstuck.
