How do I reset my Netgear fvs318n?

How do I reset my Netgear fvs318n?

Power on the Netgear ProSafe FVS318G by plugging it to the power adapter. Using a pin or paperclip, press and hold the Factory Defaults button for 10 seconds and the Test LED will begin to flash. Wait a few minutes while the Netgear ProSafe FVS318G restores to the factory default settings.

How do I reset my Netgear ProSafe Firewall?

Choose http://192 as the entry if you are connected to a router. 168 The user enters in to the web interface by clicking first. For 10 seconds, turn the device off, and then press the Factory reset button on the back.

How do I reset a Netgear switch?

To return a smart switch to factory default settings in the web management interface:

1. Open a web browser.
2. In the browser address field, type the IP address of the smart switch.
3. Type the password in the Password field.
4. Click the Login button.
5. Select Maintenance > Reset > Factory Default.
6. Select the check box.

What is the default password for Netgear switch?

Type the admin password of the switch (the default password is password) and click Login.

How do I reset my Netgear Prosafe M4100?

To restore your M4100 to the factory default from the boot menu:

1. From the boot menu select option 11 and press enter.
2. Press 1 to reboot the switch.

How do I setup my NETGEAR Prosafe switch?

To set up the switch:

1. Install the switch using one of the following methods:
2. Apply AC power.
3. Connect devices to the switch.
4. Note:
5. Use the local browser interface to configure the IP address.
6. At the user prompt, log in to the switch using the user name admin and press Enter.
7. NETGEAR, Inc.
8. NETGEAR INTERNATIONAL LTD.

How do I factory reset my Smart switch?

Press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process. To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

How do I log into my NETGEAR Prosafe switch?

Open a web browser. Type the IP address of the switch into the address bar of the web browser and press Enter. Type the admin password of the switch (the default password is password) and click Login.

How do I factory reset a NETGEAR?

To reset your NETGEAR cable modem or modem router:

1. Locate the Reset button on the back of your cable modem router.
2. Using a paper clip or similar object, press and hold the Reset button for about seven seconds.
3. Release the Reset button and wait for your cable modem router to reboot. Factory default settings are restored.

How do I setup my Netgear Prosafe switch?

How do I reset my Netgear gs108pe?

How to reset a router to factory defaults

1. Step 1: Find the reset button. There should be a tiny reset button.
2. Step 2: Push the reset button. While the router is on, push and hold the reset button.
3. Step 3: Hold the reset button.
4. Step 4: Reboot the router.
5. Step 5: Log in to the router.