How do I set up my Tenda router?
Table of Contents
How do I set up my Tenda router?
How to setup this wireless router(R)
- open your web browser (IE, Firefox,Safari,etc) ,find the address bar, leave it blank and type 192.168. 0.1 Press enter.
- Then you can see the following page, input default user name and password: admin, then click ok.
- Then you will see the following homepage of tenda router.
How do I connect my Tenda device to WiFi?
Step 1 Connect your smart phone to the internet by connecting it to a WiFi network nearby or enabling your mobile data. Step 2 Run the Tenda WiFi App on the smart phone. Step 3 Tap on the upper-right corner. Step 4 Use your account to log in, and then you can manage your nova network remotely.
How connect Tenda router to Main WiFi?
1. Please Click WLAN Settings, then click Basic Settings to set the name of your wireless network, please change the SSID to tenda123 (the name of wireless network) and choose channel 6, then click Apply to save the settings. 3. Click WLAN Settings, then click Security Settings to set the password.
How do I change my 192.168 0.1 password Tenda?
Step 1: Login the homepage.
- Open a browser then type “192.168. 0.1” into the Address Bar, press Enter.
- Then the interface will turn into the homepage, tap “Wireless Settings”, change your SSID and password in this page, and tap “OK”.
- The notice window would be shown on the top.
What is IP address of Tenda?
The default LAN IP address of Tenda router is 192.168. 0.1. You can change the LAN IP address to 192.168. 10.1, then click Apply and the router will reboot.
How do I reset my Tenda wifi router?
On the back of the Tenda AC1200 wireless router locate the WPS/RST button. Press and hold this button for at least seven seconds. This will cause the router to perform a factory reset. The process will take one to two minutes to complete.
Why is my Tenda wifi not working?
You can reset the Tenda device to factory default there. ii. Find a Reset or RST button/hole on the side of the Tenda device and hold down it for about 10 seconds. During which time, you will find that all the indicators turn on or off and several of them will back off or on later.
Can’t connect to Tenda wifi router?
You can try solutions as below.
- Power cycle your modem and the Tenda device.
- Change the LAN IP address in the setup page.
- Clone the MAC address.
- Change the DNS Address.
- Change the MTU value.
- Change the WAN speed in setup page.
- Reset the Tenda device to factory default.
- Upgrade to a newer firmware.
What is Tenda admin password?
The default username for your Tenda router is admin. The default password is admin.
Why is my Tenda router blinking?
LED Status Description POWER Solid Indicates a proper connection to the power supply SYS Blinking Indicates system is functioning improperly WAN Solid WAN port connected correctly Blinking WAN port is transferring data WLAN Solid Wireless is enabled.
Which lights should be on my Tenda router?
4 Please check the LED lights on the router after connection. Make sure SYS light is blinking, WLAN light is on or blinking, one of LAN ports(1,2,3,4) is on, WAN light is on or blinking.
What is the IP address of Tenda router?
192.168.0.1
The default LAN IP address of Tenda router is 192.168. 0.1. You can change the LAN IP address to 192.168. 10.1, then click Apply and the router will reboot.
What is the default username and password for Tenda router?
Tenda Router Login Guide The default username for your Tenda router is admin. The default password is admin.
How can I get my Tenda username and password?
The default username for your Tenda router is admin. The default password is admin. Enter the username & password, hit “Enter” and now you should see the control panel of your router.
How can I find my Tenda WiFi password?
Note: The default password is shown on the bottom of the router. If you have changed it and you also forgot it, see “Forget your password?” below the “Login” button. 2. Then the interface will turn into the homepage, tap “Wireless Settings”, change your SSID and password in this page, and tap “OK”.
How do you setup a password for your Wi-Fi?
How to change your Router’s Wi-Fi password
- Open your browser to the configuration page of your router:
- Enter your router’s username and password details:
- Open the Wireless section:
- Change the password:
- Set your security type:
- Save your settings:
