How do you clean a Scotsman dce33a?
Table of Contents
How do you clean a Scotsman dce33a?
A sanitizing solution can be made of 1 ounce of household bleach and two gallons of hot (950F. – 1150F.) water. Use a clean cloth and wipe the interior of the ice storage bin with the sanitizing solution, pour some of the solution down the drain.
How long does it take a Scotsman ice maker to make ice?
After about 20 minutes the machine will begin to release the ice, this is called the harvest cycle. Observe the first cube harvest: Check the size of the ice cubes. Note: The normal size of the ice cube has a 1/4″ depression in the wide end.
How long does the clean cycle run on a Scotsman ice machine?
You must run the rinse cycle because it will flush out all of the Scotsman Ice Machine Cleaner from the water system. This rinsing cycle should last about 20 minutes.
How do I put my Scotsman ice machine in clean mode?
Cleaning the Water System & Sensors
- Prepare the unit – Start by removing the front panel and evaporator cover from the machine.
- Push the “Clean” button – When you push and release the “Clean” button, the yellow light will blink and display a “C.” This will harvest remaining ice, drain the reservoir and start refilling.
How do you reset a Scotsman ice maker?
Reboot Your Scotsman Ice Machine On the control panel, press the “off” button and power down the machine. Wait about 10 seconds and then press and hold the “on” button for a couple of seconds. This will turn the machine back on and initiate the reset process.
How do you drain water from a Scotsman ice maker?
Shut water supply off, either by lifting the float with the lever on the size of the reservoir or by shutting the water off to the ice machine. 4. Drain water from ice making system by pulling reservoir drain hose from plug at drain basin and return to plug when drained. Note: Drain into drain basin in base of unit.
How do you run a clean cycle on a Scotsman ice machine?
How do you troubleshoot a Scotsman ice maker?
Scotsman Ice Machine Troubleshooting Guide
- Check the room temperature.
- Check the water temperature.
- Level the machine.
- Deep clean the machine.
- Check the waterline and water regulator valve.
- When to schedule service.