How do you read a tape measure for dummies?
Table of Contents
How do you read a tape measure for dummies?
How to Read a Tape Measure
- Find/read the markings. On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them).
- As the increments decrease, so does the length of the mark.
- Read 1 inch.
- Read one-half inch.
- The remaining markings follow a similar pattern.
What is .125 on a tape measure?
| FRACTIONS | INCHES | MILLIMETERS |
|---|---|---|
| 3/32 | .09375 | 2.381 |
| 7/64 | .109375 | 2.778 |
| 1/8 | .125 | 3.175 |
| 9/64 | .140625 | 3.572 |
What are the little lines on a tape measure?
4. Eighth-inch markings. The little lines on the tape measure between the one-inch and quarter-inch markings measure an eighth of an inch. 5.
What does 1/8 look like on a ruler?
The 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler. Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler.
What object is 1/8 of an inch?
Together, the coin stack’s height is roughly equivalent to 1/8 of an inch, which is the Epicurious Test Kitchen’s recommended thickness for pie dough.
What are the lines on a tape measure?
How to Read a Tape Measure
- Inch markings. Each side has markings, with the long lines and large numbers indicating the one-inch marks (according to the imperial system).
- Half-inch markings.
- Quarter-inch markings.
- Eighth-inch markings.
- Sixteenth-inch markings.
- Foot markings.
Where is .125 on a tape measure?
| FRACTIONS | INCHES | MILLIMETERS |
|---|---|---|
| 5/64 | .078125 | 1.984 |
| 3/32 | .09375 | 2.381 |
| 7/64 | .109375 | 2.778 |
| 1/8 | .125 | 3.175 |
What is the purpose of the little black diamond on a tape measure?
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
How big is an 8th of an inch?
Fraction, Decimal, and Millimeter Equivalent Measurements
| Fraction | Decimal | Millimeters |
|---|---|---|
| 1⁄8“ | 0.125 | 3.175 |
| 3⁄16“ | 0.1875 | 4.7625 |
| 1⁄4“ | 0.25 | 6.35 |
| 5⁄16“ | 0.3125 | 7.9375 |
What are the lines in between inches called?
Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler.
