How wide is a tri five rear end?

How wide is a tri five rear end?

Products specifications

Vehicle Fitment 55-57 Chevy Tri-5 (120, 210, Bel Air and Delray ) Call for Station Wagons, Nomad and Sedan Delivery
Wheel Bolt Pattern 5 on 4 3/4″ with 7/16″ studs installed
Brake Space 2.5 inches (axle standoff)
Width 60 inches (between wheel mounting surfaces)

How wide is a Gbody rear end?

58 inches
Products specifications

Vehicle Fitment 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons)
Brake Space 2.5 inch axle standoff
Width 58 inches (between wheel mounting surfaces)

What is the gear ratio on a 1957 Chevy Bel Air?

3.36 is the most common in 57s, other ratios that are available stock housing include 3.08, 3.55, 3.70, 4.11,and 4.56 etc.

How do I know what kind of differential I have?

The easiest way to tell if you have an open differential is to jack up the car and spin one of the rear tires. If the other wheel spins in the opposite direction, you have an open differential. If it spins in the same direction, you have a limited slip differential, or LSD.

How wide is a GM 10 Bolt?

The 8.5-inch 10-bolt rearend was used in cars and trucks over a wide range of years. It first appeared in 1970 production cars as a corporate replacement for the 8.2-inch 10-bolt rearend. It was used in different models by all GM divisions – with the exception of Cadillac.

What’s the best rear end for G body?

Fox-body rear
Unless you plan to cut and narrow the rear, the Fox-body rear is by far the best choice of the bunch, since it is the closest to the factory G-body width (57.25-inches). Though the Ranger rearend is the same width and comes with 5-lug axles, as well as 3.73:1 or 4.11:1 gears, you will want to steer clear.

What are the gear ratios of a 5 speed transmission?

The average 5-speed, such as a T5, is an extremely wide ratio by 1960s standards. The close-ratio T5s used by Ford Motorsport have a 2.95 first, 1.94 second, 1.34 third, 1.00 fourth, and . 80 fifth. You do the math with the formula.

What’s the difference between a 10 bolt and a 12-bolt rear end?

First, the 10-bolt’s pinion shaft diameter is 1.438 (25 splines) while the 12-bolt is 1.625 (30 splines) which makes the 12-bolt 13 percent larger in diameter and therefore stronger.

Is a 12 bolt rear end better than a 10-bolt?

How wide is a factory g body rear end?

  • October 19, 2022