How do I connect my TP-Link wireless router to my modem?
Table of Contents
How do I connect my TP-Link wireless router to my modem?
Advanced Preparations：
- Turn off your modem, router and computer.
- Connect your modem to the WAN port of the TP-Link router via an Ethernet cable; connect a computer to TP-Link router’s LAN port via an Ethernet cable.
- Power on your router and computer first and then modem.
How do I setup a router at home?
But if you want a general walk-through of setting up your home network, these steps should get you fully connected.
- Check your internet connection.
- Place the router.
- Connect to power.
- Connect to your internet source.
- Access the router’s web interface.
- Connect wired devices.
- Connect your PC or device to Wi-Fi.
How do I install a TP Link wireless adapter?
Insert the adapter into a USB port on your computer directly. Click or (Network icon) on the task bar, select your Wi-Fi network, and click Connect. Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows Wireless Utility. Select your Wi-Fi network from the utility window and click Connect.
How do I get my TP-Link to work?
TP-Link Plug and Play Simply plug a Powerline adapter into a power outlet and connect it to your router’s LAN port via an Ethernet cable. Then plug in another adapter or extender into a power outlet on the same electrical circuit. When the Powerline LED turns on, enjoy your newly extended network.
How do I install my router?
How do I setup my wireless router and modem?
Connect your router to your modem. Connect the router and the modem with an Ethernet cable. Most routers come packaged with a short Ethernet cable that you can use for this. Connect the modem to the WAN / Internet Port on your router. It is usually offset, and may be a different color from the LAN Ports.
Why is my TP Link extender not working?
Check the wireless signal strength of the end devices. If only one end device cannot join the Wi-Fi of the range extender, remove the profile of the wireless network and connect it once again. And connect it to your router directly to see if it can connect.
How do you reprogram a wifi extender?
Web GUI
- Reset the extender by pressing and holding the reset button for 10 seconds using a paper clip or pin.
- Once extender has completed its reboot, connect your device to the default SSID (NETGEAR_EXT).
- Click NEW EXTENDER SETUP button.
- Create a new account by filling out the required fields and click NEXT to continue.
Can I use third party firmware with TP-Link products?
TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product’s warranty.
Why does my TP-Link router get a Wan ip but no Internet?
Why my TP-Link Router gets a WAN IP from the modem but no internet access？ 04-18-2019 403241 A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
What is the TP-Link firmware update 403241?
04-18-2019 403241 A firmware update can resolve issues that the previous firmware version may have and improve its current performance. Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty.
