How do I fix error 03 on my Canon printer?
Table of Contents
How do I fix error 03 on my Canon printer?
Paper Is Jammed inside the Machine
- Make sure that the jammed paper is not under the FINE cartridge holder.
- Hold the jammed paper with your hands.
- Pull the paper slowly not to tear it, then pull the paper out.
- Make sure that all the jammed paper is removed.
How do you fix a paper jam on a Canon printer?
Solution
- Turn off the printer and unplug it.
- Retract the paper output tray and open the cover.
- Check if jammed paper is under the ink cartridge holder.
- Hold jammed paper firmly in both hands.
- Slowly pull out the paper, so as not to tear it.
- Make sure all jammed paper is removed.
- Close the cover.
What does e02 mean on a Canon printer?
Canon printer error: “Error e02” Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.
What does E3 mean on my printer?
During a print job, the ink cartridge carriage stalls in the printer, and a Carriage Jam or E3 error displays on the printer control panel.
What do I do when my printer says paper jam but there is none?
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.
What does E3 mean on a Canon printer?
Error 3 will display on the LED screen as “E3” or “Error 3,” this error results when the printer malfunctions. Clearing the error code only takes a few steps and clears the memory of the printer to restore it to its normal state. Canon suggests clearing the code before contacting professional service repair.
How do I fix my E3 printer?
Reset the printer
- If your printer has a rechargeable battery, remove it.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. Note:
- Turn on the printer to complete the reset.
How do I get rid of paper jam notification?
Close the Jam Clear Cover. Make sure the cover is closed correctly….- If ink gets on your skin or clothing, immediately wash it off with soap or detergent.
- Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the open position.
- Check the position of the print head.
