How do I reset my ATT MicroCell?

How do I reset my ATT MicroCell?

Hold in the reset button on the back of the unit (you’ll need a paperclip), turn off the power to it and then restore power holding in the reset button for about 30 seconds. The MicroCell should go thru the entire Initial Activation sequence which will include downloading any updates if they are available.

What do the lights mean on a AT MicroCell?

When the Network light is solid green, the device is active and connected to a 3G network. Note: If the Network Light is flashing green, the MicroCell may be activating or downloading new software. During the activation process, it can take up to 90 minutes for your MicroCell to complete activation.

Does AT still support MicroCell?

As of December 31st, 2017, the AT MicroCell has been discontinued. If you own a MicroCell and rely on it for placing calls at your home or at your office, now may be the time to start thinking about replacing it.

Why won’t my calls go through AT?

Try these tips to get your phone working again Turn your phone off and back on. Try calling the number again. Make sure your software’s up to date: Go to att.com/softwareupdates. Confirm you have wireless service.

Why is my phone not connecting to my MicroCell?

Turn your cell phone off and then turn it back on. If restarting your 3G, 4G or 4G LTE cell phone does not resolve the issue, then restart your MicroCell. Unplug the power adapter from the wall outlet, wait 10 seconds, then plug it back in. It may take an additional 30 minutes for the Network light to turn solid green.

How do I reactivate my AT MicroCell?

This tutorial shows how to go about the activation process.

1. Write down your MicroCell’s serial number as you will need it for online activation and for future reference.
2. To activate your MicroCell, open a web browser, and navigate to www.att.com/microcell.
3. Locate and click Activate.
4. Tap the desired account type.

Why is my AT MicroCell not working?

Why is my AT MicroCell flashing red?

Flashing Red– The MicroCell has failed the location check. Please ensure the MicroCell is registered to the correct address. Please power cycle the MicroCell to trigger a new location check.

Why is my phone not connecting to MicroCell?

How do I know if my AT MicroCell is working?

Your device is configured and working properly when: You receive a text message and an email confirmation. The Network light on your MicroCell is solid and green. Your cell phone shows “AT MicroCell” or “AT M-Cell” instead of “AT” as the network provider (as shown below).

How do I get my phone to connect to MicroCell?

Connect your MicroCell to a power outlet with the AC power adapter. The Power light on the front of the device will come on immediately. Within a few minutes, other lights will flash as a GPS signal is located and software is updated. Visit att.com/MicroCell-Activate and follow the instructions on the screen.

How do I connect my phone to my AT MicroCell?

Turn your cell phone off and then turn it back on. Make sure your 3G, 4G or 4G LTE cell phone is on the approved user list for your MicroCell. Go to att.com/MicroCell and manage your settings. YES: Your MicroCell is active and your device is connected successfully.

How do I connect my phone to AT MicroCell?

Log in at https://www.att.com/microcell using your myAT account information.

1. In the Your MicroCell Device Approved User List section, click on Delete for the number being removed.
2. Then click Add a New AT Number to this Approved User List.
3. Add the number (and a nickname if desired) and click Save.

How do I know if my AT cell booster is working?

Ensure that you are on the AT Cell Booster Pro network, and not the Macro Network (which may have poor coverage). The 4G C1 & C2 LEDs will flash white when an active wireless user is using the AT Cell Booster Pro network, and will be solid white when the device is ready for use.

How do I connect to my AT MicroCell?

Login to MicroCell Website

1. Open a web browser on your computer, and navigate to www.att.com/MicroCell, then click Manage Settings.
2. Click your account type.
3. Enter your myAT User ID and Password then click Log in.
4. Click the desired wireless number that is linked to your MicroCell device, then tap Continue.

Why is my AT mobile data not working?

If you haven’t already, please reset your network settings, go to Settings App> General > Reset > Reset Network Settings to refresh your network connection. Check your wireless usage to confirm data on your plan. Also, check out your AT Prepaid Coverage for connection and signal strength.