How do you clean an instrument after decontamination?
Table of Contents
How do you clean an instrument after decontamination?
The instruments should not be left in dilute bleach for more than 10 minutes and should be cleaned in boiled water immediately after decontamination to prevent discolouration and corrosion of metal.
How do you handle contaminated instruments?
All contaminated instruments and devices should be handled carefully by DHCP wearing heavy-duty utility gloves in addition to other appropriate PPE such as protective clothing, protective eyewear, masks, and head and shoe covers. Examination gloves do not provide adequate protection against sharps injuries.
What are the three components of decontamination?
Decontamination methods either (1) physically remove contaminants, (2) inactivate contaminants by chemical detoxification or disinfection/sterilization, or (3) remove contaminants by a combination of both physical and chemical means.
What are the three reprocessing procedures for equipment?
Level of reprocessing
- Application: Entry or penetration into sterile tissue, body cavity or bloodstream. Process: Sterilisation.
- Application: Contact with intact mucous membranes or non-intact skin.
- Application: Clean as necessary with detergent and water (disinfect after cleaning as required)
What is the correct order of steps when processing contaminated instruments?
The instrument processing work flow must follow the CDC guidelines, with the following sequential steps: disposal of sharps; transportation; disposal of single-use disposable instruments and waste; sorting of instruments and handpieces; cleaning; sterilization and storage.
Which of the following should you do when you sanitize instruments?
29 Cards in this Set
| the process of cleaning and scrubbing instruments and equipment, generally by washing with detergent and scrubbing, as needed, is | sanitization |
|---|---|
| what should you do when you sanitize instruments | wear utility gloves |
What category is decontamination shower?
workshop object plan
Plan: Decontamination shower is a workshop object plan in Fallout 76.
What are the 3 factors you must abide by when handling and cleaning patient equipment?
The choice of products for cleaning and disinfection is an important one; effectiveness of the product, suitability for the surface and practicality must all be considered.
What are the 7 steps for instrument processing?
Terms in this set (7)
- Step 1: Transport. Transport contaminated instruments to the processing area in a manner that minimizes the risk of exposure to persons and the environment.
- Step 2: Cleaning.
- Step 3: Packaging.
- Step 4: Sterilization.
- Step 5: Storage.
- Step 6: Delivery.
- Step 7: Quality.
What should metal implements be disinfected with?
It is recommended to spray 60-90% isopropyl or ethyl alcohol on clean, porous abrasives and buffers to disinfect them. A contact time of 5 minutes is sufficient for proper disinfection. All properly cleaned, disinfected and dried implements/tools must be stored in a sanitary manner.
