How do you design a bus terminal?
Table of Contents
How do you design a bus terminal?
- It should form a component in the hierarchy of transport systems.
- It should be a component in the hierarchical system of transportation terminals.
- The concentration and dispersal costs should be minimum.
- It should be located such that as point of coordination and integration between inter-city and intra-city transport.
What are the necessary design requirements of a bus shelter?
The width of the shelter should be between 1.2 to 1.5 m and its length should be between 2 to 5 m. A minimum width for entrance to the shelter should be 800 mm. There should be a free space at least 900 to 1200 mm inside the shelter scope for people with wheelchairs, carts and strollers during the waiting period.
What is the purpose of bus terminal?
A bus terminal, or terminus, is the point where a bus route starts or ends, where vehicles stop, turn or reverse, and wait before departing on their return journeys. It’s also where passengers board and alight from vehicles.
What is the size of a bus?
| Classic (transit bus) | |
|---|---|
| Transmission | Allison, ZF or Voith |
| Dimensions | |
| Length | 40 ft (12.19 m) (16 60 ft (18.29 m) units produced) |
| Width | 102 in (2.59 m) |
What is bay bus terminal?
A bus bay is, in a way, the opposite of a bus bulb. With a bus bulb, the point is to save the bus the time needed to merge out of and back into moving traffic, at the cost of temporarily blocking that traffic while making a stop.
What is the standard size of a bus stop?
810.2. 2 Dimensions. Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches (1525 mm) minimum, measured parallel to the vehicle roadway.
What is the height of a bus shelter?
A bus stop typically features a bench or cover overhead to sit underneath. How tall is the bench at a bus stop? Typically, a bench at a bus stop has a height ranging between 18 and 20 inches (45.7 and 50.8 cm). This range is considered to receive the maximum amount of functionality out of seating.
What size is a bus shelter?
Shelter pad: 6’6” x 10’6” Landing pad: 6′ min. connecting curb to sidewalk.
What is another word for bus terminal?
bus depot (noun) bus station (noun)
What is the height of bus?
Coach Buses have average lengths of 39’4” (12 m), widths of 8’4” (2.55 m), heights of 12’6” (3.81 m), and have a capacity of 44-49 (+1) seats. Coach buses are buses designed specifically for longer-distances with greater accommodations for passenger comfort during these extended periods of travel.
What are bus bays?
A bus turnout, bus pullout, bus bay, bus lay-by (UK), or off-line bus stop is a designated spot on the side of a road where buses or trams may pull out of the flow of traffic to pick up and drop off passengers. It is often indented into the sidewalk or other pedestrian area.
How far does a bus stop need to be from a junction?
Bus stops should normally be located not less than 30 meters from a main road junction, in order to minimize obstruction of turning traffic. On the other hand, if passengers are to connect with buses on intersecting routes, it’s desirable for buses to stop within easy walking distance of junctions.
How wide is a bus?
| Classic (transit bus) | |
|---|---|
| Dimensions | |
| Length | 40 ft (12.19 m) (16 60 ft (18.29 m) units produced) |
| Width | 102 in (2.59 m) |
| Chronology |
What glass is used for bus shelters?
Traditionally a bus shelter roof has been made from clear glass or polycarbonate. This is a see-through roof.
What plastic is used in bus stops?
— Companies in the industry manufacturer bus shelters, bus stations and light rail transit waiting areas from materials such as Polycarbonate (Makrolon®, Tuffak®, and Lexan™), Acrylic (Acrylite®, Lucite®, Optix®, Plexiglass), and other plastics used for weather protection, signage and display.
What are bus shelters made of?
Aluminium. Aluminium is the most common material used when making bus shelters. This metal is lightweight but tough, making it perfect for quick installation. The aluminium is usually powder coated to provide an extra layer of protection and colour.
What does a bus stop need?
They should be designed to accommodate the maximum number of passengers normally waiting, and to provide adequate protection from the weather. They should be well lit and ventilated, and approaching buses should be visible from inside the shelter. Where waiting times may be long it may be desirable to provide seating.
