How do you lubricate a handpiece?
Table of Contents
How do you lubricate a handpiece?
To lubricate the high speed handpiece, inject lubricant into the smallest of the two large holes until it’s lightly pours out. Before reusing it, attach it to your dental unit and run it for approximately 10 seconds.
When should handpieces be lubricated?
Lubricate & Clean Internally Using a good quality service oil & the correct adaptor, insert into handpiece and spray for approx 2 seconds until oil comes from the head. You cannot over oil your handpieces. The spindle/chuck of handpieces should be lubricated once a day with the pointed lubricant adaptor.
How often should you oil dental handpieces?
Lubrication is an essential task when it comes to your low-speed dental handpieces. It is best to lubricate the motor of your device after every 5 autoclaves. Simply obtain a pen-shaped oiler and place up to 3 drops of the oil into the air tube of the drive mechanism.
Why is oiling of handpieces important?
Oil is the lifeblood of your dental handpieces, helping them to work smoothly and efficiently day in, day out. With the right care as well as cleaning, lubrication and sterilisation processes, you can maximise the lifespan of your handpieces while minimising unnecessary repairs and replacements along the way.
Which hole does the lubricant go in for a dental drill handpiece?
Look at the larger holes; place two to three drops of oil in the smaller of the two holes, which is usually on the right, known as the air inlet. Run the handpiece for five to ten seconds to distribute the oil to all internal parts.
Why must oil be used in handpieces?
How do you clean and lubricate dental handpieces?
A mild detergent is acceptable but make sure to run clean of all dirt, dust, and bio-matter before sterilizing. If there is still some bio-burden left on the handpiece, clean under running water using a brush. Flush water through the handpiece for 30 seconds in the operatory to clean out the internal water line.
How often should you oil your handpiece?
Can you over oil a dental handpiece?
It is common for individuals to be instructed to avoid spraying too much of a lubricant into the dental handpiece.
How often should you lubricate dental handpieces?
How long should handpieces be sprayed for?
Lubrication and internal cleansing Holding the can upright, insert the nozzle into the base of the handpiece. Spray for 1-2 seconds into a tissue covering the handpiece head (or until the excess oil being blown into the tissue runs clean).
How often should I oil my dental handpieces?
