How do you make a 10M solution of NaOH?

How do you make a 10M solution of NaOH?

Method. Add 40 g NaOH to a suitable container. Add distilled water to make solution up to 100ml.

How do you make 12 M NaOH?

NaOH solution was used for preparing the bricks, For preparing 12M NaOH solution, 480 gm of NaOH was dissolved in 1000 ml of distilled water.

How do you make a 5m solution of NaOH?

Weigh out 30 g NaOH. Add to 500 mL beaker. Initials: 2. Measure out 250 mL milliQ water and add to beaker.

How can you prepare 0.1 M NaOH solution?

Preparation and Standardization of 0.1 M Sodium Hydroxide

1. Take about 100ml of distilled water in a cleaned and dried 1000 ml volumetric flask.
2. Add about 4.2 gm of Sodium hydroxide with continues stirring.
3. Add more about 700ml of distilled water, mix and allow to cool to room temperature.

How do you make a 10 solution?

10 percent solution means the solute is only 10% in the solution, so taking the volume of the solvent 100 ml then the mass of the solute will be either 10 gram or 10 ml. For example, 10% solution of sodium chloride (NaCl) means 10 grams of sodium chloride is mixed in 100 ml of water.

How do you make an 8M NaOH solution?

An 8M (molar) solution of NaOH in water contains 8 moles of NaOH in 1 liter water. The molecular weight of NaOH is 23 (Na) + 16 (O) + 1 (H) = 40. 1 mole of NaOH is therefore 40 grams. Hence 8 moles are 8 x 40 = 320 grams of NaOH.

How do you make a 10M solution?

To prepare a 10M NaOH solution, you need to dissolve 10 times more NaOH i.e., 400 g of NaOH for 1 L solution. Here we will prepare 100 ml of 10M NaOH solution. Therefore, we need to take 40 g of NaOH.

How do you make a 1M solution of NaOH?

To make 1 M NaOH solution, you have to dissolve 40.00 g of sodium hydroxide pellets in 250 mL distilled water and then make up the solution to 1 liter. Weigh 19.95 gm of NaOH pellets & dissolve them in half liter(500ml) of distilled water water, what you will be having now is 1M NaOH solution.

How do you make 10 mm solution from 1M?

Take 1 part of your stock solution and add 9 parts of solvent (usually water but sometimes alcohol or other organic solvent). In all cases you are diluting by the same factor. The concentration of the resulting solution is 1M /10 = 0.1M where 10 is the dilution factor.

How do you make a 10ml solution of NaCl?

Normality is a measure of concentration equal to the gram equivalent weight per liter of solution. For making NaCl Solution 10(N), add water to 584.43(g) NaCl till its volume reach to 1(lit).

How do you make 2 M NaOH?

So, If we mix 40.0 g of NaOH with enough distilled water to make 500 mL, we will get a 2.00 M NaOH solution.

How do you make 10 mM solution from 1M?

How do you make a 6M NaOH solution?

6M NaOH solution is made by dissolving 6 mols of NaOH in 1 liter of H2O. NaOH has a molar mass of 39.9997 g/mol so for a 6M solution, we need 240 g NaOH (39.997 x 6) in 1L of H2O. This is an exothermic reaction so use caution.

How do you make 6 M NaOH?

6N NaOH = 6M NaOH 6M NaOH are 6 moles in 1L MW (NaOH) = 39.88 gr/mole so: m = n x MW = 6 x 39.88 = 239.28 gram NaOH.

How do I make a 10mM solution?

take 700 uL from the solution (your org comp dissolved in water) and pour it in a separate vial (2 mL) and add 300 uL of water in it. Now you have 1 mL of your stock with a molarity of 10 mM. you can use this link to calculate in future. Best of luck with you assay.

How do you make a 10X solution?

10X means the solution is ten times higher in the solute concentration. Example: If i have a solution of sugar with initial concentration of 1mg/ml and someone ask me to prepare a 10X solution. I simply add 10 times sugar (solute) to the existing amount of solvent.

How do you make a 10 solution by volume?

We can make 10 percent solution by volume or by mass. A 10% of NaCl solution by mass has ten grams of sodium chloride dissolved in 100 ml of solution. Weigh 10g of sodium chloride. Pour it into a graduated cylinder or volumetric flask containing about 80ml of water.

How do you make a 10 mM NaCl solution?

Weigh 10g of sodium chloride. Pour it into a graduated cylinder or volumetric flask containing about 80ml of water. Once the sodium chloride has dissolved completely (swirl the flask gently if necessary), add water to bring the volume up to the final 100 ml.

How do you make a 10mM solution from molecular weight?

10mM=0.01M =0.01mol/L. but n=m/MW, so that m=n*MW=0.01mol*1255.42g/mol =12.5542g in 1 liter….All Answers (2)

1. The MW tells you that 1255.42g per 1 mole or 1255.42mg per 1 mmole.
2. Thus, 10mmole would be 1255.42mg*10 = 12554.2mg.
3. Therefore, in a 10mM solution, you would need 12554.2mg/L.
4. You only have 125ug = 0.125mg.