How do you read 0 micrometer?
Table of Contents
How do you read 0 micrometer?
How to Read Vernier Micrometer. Consider the micrometer reading shown below: If this was a 0 – 1″ micrometer it would read somewhere between 0.255″ and 0.256″. (250 on the Sleeve, with more than 5, but less than 6 on the Thimble).
How do you read a micrometer value?
The thimble scale of a metric micrometer has a range of 0.5mm (one complete revolution), with each increment representing 0.01mm, and usually numbered in 0.05mm steps. The value is the lowest number that aligns best with the index line on the sleeve scale.
How do you read a digital micrometer in MM?
Step1: The digital micrometer can provide high precision reading with the LCD display. So you can get the reading directly from the large LCD display. For example, the reading is 14.054 mm in the picture. You can also get the reading by reading the marks on the sleeve and the thimble.
What is .001 on a micrometer?
0001″ Micrometer: To read to one ten-thousandth requires an additional scale called the “Vernier” scale. The vernier consists of ten divisions, marked on the sleeve, Each graduation of the vernier scale on the sleeve, represents . 0001″.
What is the reading shown on the metric micrometer with a vernier scale of 0.002 mm?
0.002 mm is equivalent to approximately 0.00008 of an inch. The vernier is graduated in increments of 0.002 mm starting and ending with 0 (Figure 5). If either 0 on the vernier graduation scale lines up with the thimble reading, no additional thousandths of a millimeter are added to the reading.
What are the numbers on a micrometer?
Starting with the barrel scale, you will see a line of numbers across the barrel of your micrometer. Each number on the barrel scale represents 0.100. When looking at the barrel 1=0.100, 2=0.200, 3=0.300, and so on. Each of the tick marks between the bigger numbers on the barrel is equal to 0.025 or 25 thousandths.
How do you read a micrometer in tenths?
In the micrometer tenth of thousandth the smaller difference between indications is divided by ten by one vernier scale graved in the sleeve. this way, the resolution will be: Resolution = 0.001in / 10 = 0.0001 in.
